>-----Original Message----- >From: [email protected] [mailto:[email protected]] On >Behalf Of Mike Christie >Sent: Monday, February 28, 2011 7:55 AM >To: Vikas Chaudhary >Cc: James Bottomley; [email protected]; Lalit Chandivade; Harish >Zunjarrao; Manish Rangankar; Ravi Anand; open-iscsi >Subject: Re: [PATCH 0/5]: Proposal for iSCSI Network Configuration > >On 02/25/2011 05:05 AM, Vikas Chaudhary wrote: >> These are set of patches for configuring network setting for iSCSI >adapter (qla4xxx) that use private IP address. >> Please review proposal/implementation and let us know the feedback. >> > >Hey, > >So what happened with bsg? Why did you switch again?
- For network configuration we found current Netlink interface to be sufficient. - Initially we tried to implement network configuration using BSG as we needed all network parameters in one short from application to driver in vendor specific format. Now we are doing same using Netlink interface and TLV mechanism (vendor agnostic format) which is scalable easily for any new network parameter. - We still need the BSG interface, which we are working on our side, to get the adapter FLASH related read/write operations. This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
