Modified the 10s wait time for inflight offload connections to
advance to the next state to 2s based on test result.
Modified the 20s shutdown timeout to 30s based on test result.
Signed-off-by: Eddie Wai <eddie....@broadcom.com>
---
drivers/scsi/bnx2i/bnx2i_init.c | 2 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 1d24a28..6adbdc3 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -244,7 +244,7 @@ void bnx2i_stop(void *handle)
wait_event_interruptible_timeout(hba->eh_wait,
(list_empty(&hba->ep_ofld_list) &&
list_empty(&hba->ep_destroy_list)),
- 10 * HZ);
+ 2 * HZ);
/* Wait for all endpoints to be torn down, Chip will be reset once
* control returns to network driver. So it is required to cleanup and
* release all connection resources before returning from this routine.
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 7b4d1d0..51a970f 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -858,7 +858,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
mutex_init(&hba->net_dev_lock);
init_waitqueue_head(&hba->eh_wait);
if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
- hba->hba_shutdown_tmo = 20 * HZ;
+ hba->hba_shutdown_tmo = 30 * HZ;
hba->conn_teardown_tmo = 20 * HZ;
hba->conn_ctx_destroy_tmo = 6 * HZ;
} else { /* 5706/5708/5709 */
--
1.7.0.5
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com.
To unsubscribe from this group, send email to
open-iscsi+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
