Mike Christie wrote:
> We can see the iscsi login pdu get sent, but we do not see a iscsi response.
> From what I can tell we just seem to see a tcp ack. Then later in packet #104
> we see the initiator give up on waiting for a login response and disconnect
> the tcp/ip connection.
>
> However, the weird thing is that before we try the normal session login we
> see in packet #10 that a discovery session works ok in this test.
>
> So command #1 works but command #3 does not and between that time he
> has not done any changes to the iscsi config or network.
I noticed that after sending the login request (Packet #97) the initiator is
closing the connection (Packet #104) after 1 second, which is quite soon - I
would suggest adjusting the node.conn[0].timeo.login_timeout value back up to
the default of 15 seconds and trying again.
For more help, I'd recommend contacting the Dell EqualLogic support
organization. They're quite good, and have a lot of experience with Linux
(including this tricky multiple-NICS-on-the-same-subnet setup):
http://support.dell.com/equallogic/
--
Jim Ramsay
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
