Assuming all your LUNs are under the same target, you can check what LUNs are being served by `iscsiadm -m session -P 3` after you log in. Maybe 4 is not the correct LUN number (the first LUN being LUN 0) ? -Anish
One socket to bind them all. > -----Original Message----- > From: open-iscsi@googlegroups.com [mailto:open-iscsi@googlegroups.com] > On Behalf Of Scott Classen > Sent: Friday, September 23, 2011 2:52 PM > To: open-iscsi@googlegroups.com > Subject: multiple LUNs > > I'm going crazy here. > I apologize if this is not on topic for this list and will happily > take my question elsewhere if you feel it doesn't belong on this list. > > I have just installed CentOS6 onto an iSCSI LUN served from my NetApp. > I have configured iPXE to boot from LUN #4 by adding the following > lines in my dhcpd.conf file > > option iscsi-initiator-iqn "iqn.2010-11.com.mymachine"; > option root-path "iscsi:192.168.1.12:::4:iqn.1992- > 08.com.netapp:sn.123456789"; > > I would now like to set up four KVM virtual machines each installed on > a seperate iSCSI LUN. > > To do this I would now like to access four additional iSCSI LUNS from > the same NetApp. > > I can't for the life of me figure out how to get iscsiadm to find and > log into these additional targets. > > iscsiadm indicates I have one active session for my root partaion: > > [root@meh]# iscsiadm -m session -P 1 > Target: iqn.1992-08.com.netapp:sn.123456789 > Current Portal: 192.168.1.12:3260,2000 > Persistent Portal: 192.168.1.12:3260,2000 > > When I issue a command to discover new targets I get nothing new: > > [root@meh]# iscsiadm -m discoverydb -p 192.168.1.12:3260 -t st -- > discover > 192.168.1.12:3260,2000 iqn.1992-08.com.netapp:sn.123456789 > > > and: > > [root@meh]# iscsiadm -m node -P 1 > Target: iqn.1992-08.com.netapp:sn.123456789 > Portal: 192.168.1.12:3260,2000 > Iface Name: default > > > > How do I get iscsadm to see the other LUNs? > > Thanks > > -- > You received this message because you are subscribed to the Google > Groups "open-iscsi" group. > To post to this group, send email to open-iscsi@googlegroups.com. > To unsubscribe from this group, send email to open- > iscsi+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
