The error_mask module param overrides has a bug which prevented the new module param values to take effect.
Also changed the type attribute of the error_mask1/2 module params from int to uint to allow the MSB to be set. Signed-off-by: Eddie Wai <[email protected]> Acked-by: Anil Veerabhadrappa <[email protected]> --- drivers/scsi/bnx2i/bnx2i_hwi.c | 12 ++++++++---- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++-- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 1ad0b82..f9d6f41 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1312,14 +1312,18 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) | /* EMC */ (1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN)); - if (error_mask1) + if (error_mask1) { iscsi_init2.error_bit_map[0] = error_mask1; - else + mask64 &= (u32)(~mask64); + mask64 |= error_mask1; + } else iscsi_init2.error_bit_map[0] = (u32) mask64; - if (error_mask2) + if (error_mask2) { iscsi_init2.error_bit_map[1] = error_mask2; - else + mask64 &= 0xffffffff; + mask64 |= ((u64)error_mask2 << 32); + } else iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32); iscsi_error_mask = mask64; diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 1a947f1..cc5a6c1 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -49,11 +49,11 @@ module_param(en_tcp_dack, int, 0664); MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK"); unsigned int error_mask1 = 0x00; -module_param(error_mask1, int, 0664); +module_param(error_mask1, uint, 0664); MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1"); unsigned int error_mask2 = 0x00; -module_param(error_mask2, int, 0664); +module_param(error_mask2, uint, 0664); MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2"); unsigned int sq_size; -- 1.7.7.4 -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
