Thanks On Monday, 5 November 2012 00:48:50 UTC-8, Manju sharma wrote: > > *Hi ,* > > *Current setup is:* > (LOM of Intel i350 and NIC of intel corporation 82580 on IBM x3650M4 > Server with RHEL6.1)also i installed the software of multipathing. > > *The issue is:* > > *iSCSI session shows random behaviour* ,some time only one of the session > made via LOM and NIC card retain and sometimes both retain after system > reboot > following are some of the settings of */etc/iscsi/iscsid.conf* file > *node.startup = automatic > node.session.timeo.replacement_timeout = 30* > > ** > > *i created the session by following the below mention steps:* > > #iscsiadm -m iface -I <iface_name> --op=new > > #iscsiadm -m iface -I <iface_name> --op=update -n iface.hwaddress -v > <hardware address> > > *hardware address of particular ethX to which i want to bind the iface* > > #iscsiadm -m discovery -t st -p <portal_address> -I <iface_name> -P 1 > > *e.g of portal address: 192.168.3.4:3260* > > #iscsiadm -m node -I <iface_name> -p <portal_address> -l > > *and i check the session via following command* > > #iscsiadm -m session > - Can anybody help me in solving this* issue .i.e why session show random > behaviour *.what should i do to overcome this problem* i.e Is i have to > do some more setting so that the iscsi sessions will retain after system > reboot too. > -*Is there any particular file in Linux file system to see the iSCSI > related logs. or is there any command to debug.
-- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To view this discussion on the web visit https://groups.google.com/d/msg/open-iscsi/-/Uj8hc8IJmOgJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
