Hi, I have sucessfully mounted a iscsi target on my server using multipathing.
multipath -ll shows this: testlun (360014052e4279a04e70d013000000000) dm-3 LIO-ORG,FILEIO size=11G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active |- 25:0:0:0 sda 8:0 active ready running |- 23:0:0:0 sdb 8:16 active ready running |- 24:0:0:0 sdc 8:32 active ready running `- 26:0:0:0 sdd 8:48 active ready running As you can see there are 4 paths. Two for each nic. When I reboot the server only two paths are connected using only one nic. If i after the reboot logs into the server and runs "/etc/init.d/iscsi restart" all paths are restored successfully. One simple but dirty solution is to restart the iscsi service in rc.local but I don`t want to do that. CentOS release 6.3 (Final) iscsiadm version 2.0-872.41.el6 Best regards, Morten -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To view this discussion on the web visit https://groups.google.com/d/msg/open-iscsi/-/GykLZcs6iqgJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
