I had a similar issue (assuming target and initiator are on the same host),
the following got it to work for me.
# 1 make sure the services for iscsi initiator, daemon, network, and target
are started in the following order
S09iscsi-target
S10network
S11iscsi
S12iscsid
# 2 /etc/fstab looks like this:
UUID="a09ac05d-9f70-409d-abe8-7b8fd0e06164" /iscsi_mount
ext4 defaults,_netdev 0 0
On Thursday, April 27, 2006 6:27:31 AM UTC-4, Norguhtar wrote:
>
> Hello. I'm install iscsitarget & open-iscsi on my Gentoo Linux box. All
> work fine but... I'f i'm not run
> scsiadm -m node -r 7fdb81 -l after run iscsid. I'm don't get my iSCSI
> storage. Why automatic not work?
> software version: open-iscsi-1.0.514 iscsitarget-0.4.13
> kernel: gentoo-sources 2.6.16-gentoo-r3
>
> iscsiadm -m node -r 7fdb81
>
> node.name = iqn.2010-01.test.local:storage.video.disk1
> node.transport_name = tcp
> node.tpgt = 1
> node.active_conn = 1
> node.startup = automatic
> node.session.initial_cmdsn = 1
> node.session.auth.authmethod = None
> node.session.auth.username = <empty>
> node.session.auth.password = <empty>
> node.session.auth.username_in = <empty>
> node.session.auth.password_in = <empty>
> node.session.timeo.replacement_timeout = 120
> node.session.err_timeo.abort_timeout = 10
> node.session.err_timeo.reset_timeout = 30
> node.session.iscsi.InitialR2T = No
> node.session.iscsi.ImmediateData = Yes
> node.session.iscsi.FirstBurstLength = 262144
> node.session.iscsi.MaxBurstLength = 16776192
> node.session.iscsi.DefaultTime2Retain = 0
> node.session.iscsi.DefaultTime2Wait = 0
> node.session.iscsi.MaxConnections = 0
> node.session.iscsi.MaxOutstandingR2T = 1
> node.session.iscsi.ERL = 0
> node.conn[0].address = 192.168.200.201
> node.conn[0].port = 3260
> node.conn[0].startup = automatic
> node.conn[0].tcp.window_size = 524288
> node.conn[0].tcp.type_of_service = 0
> node.conn[0].timeo.login_timeout = 15
> node.conn[0].timeo.auth_timeout = 45
> node.conn[0].timeo.active_timeout = 5
> node.conn[0].timeo.idle_timeout = 60
> node.conn[0].timeo.ping_timeout = 5
> node.conn[0].timeo.noop_out_interval = 0
> node.conn[0].timeo.noop_out_timeout = 0
> node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072
> node.conn[0].iscsi.HeaderDigest = None,CRC32C
> node.conn[0].iscsi.DataDigest = None
> node.conn[0].iscsi.IFMarker = No
> node.conn[0].iscsi.OFMarker = No
>
> My setting. What's wrong ?
>
>
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/open-iscsi/-/ZJsKiH6Z9hIJ.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
