Perf information by itself is probably not enough to know about any blocks on the target, but open-iscsi is an initiator-only implementation.
A corresponding target implementation called IET can be found here : http://sourceforge.net/projects/iscsitarget/ There is also http://stgt.sourceforge.net/ -Anish Bhatt ________________________________ From: [email protected] [[email protected]] on behalf of [email protected] [[email protected]] Sent: Wednesday, June 11, 2014 10:10 AM To: [email protected] Subject: Does open-iscsi implement target and initiator? Hi, I am reading the http://www.open-iscsi.org/docs/README and I am not sure if open-iscsi is only for initiator. Does open-iscsi implement target of iscsi on linux? and this information says I could have blocks on my target? single iSCSI session: * 450MB/s Read and 450 MB/s Write for 64KB block Thanks! Felipe -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To post to this group, send email to [email protected]<mailto:[email protected]>. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
