Look at the iscsi iface feature in section 5.1 of the iscsi README. On Jul 11, 2014, at 4:33 AM, 木木夕 <mxh714...@gmail.com> wrote:
> Hi everyone, i have some problem, your help will be very helpful to me. > the iscsi initiator has eth0 ,eth1, eth2,eth3. > the iscsi target has IP 192.168.1.101, and it has 4 LUNs . i config the > eth0,eth1,eth2,eth3 IP 192.168.1.x > and i want to use the specific eth that i want to login the iscsi target. > for example , i want to use eth0 to login one target name, and use eth1 to > login another target name. > and they all login the IP 192.168.1.101 , the difference is -T targetname. > what would i do? > thank you! > > -- > You received this message because you are subscribed to the Google Groups > "open-iscsi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to open-iscsi+unsubscr...@googlegroups.com. > To post to this group, send email to open-iscsi@googlegroups.com. > Visit this group at http://groups.google.com/group/open-iscsi. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To post to this group, send email to open-iscsi@googlegroups.com. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
