sorry I just realized I had a configuration error in the iet.conf file.

The config was all on one line - so there actually were no (LUN) devices on 
that target. 

I used microsoft iscsi initator to help find the problem.

On Monday, April 4, 2011 at 7:09:54 PM UTC+10, Joern Koerner wrote:
>
> Hi all, 
>
> I have an iSCSI target, runing tgt which works fine with (tested for 
> example with Win,VMWare ect.) 
> Now I want to setup a Linux initiator running open-iscsi but the block 
> device /dev/sdX is not created. Discovery an login works fine so far, 
> here's the log from iscsid: 
>
> iscsid: in kstart_conn 
> iscsid: in __kipc_call 
> iscsid: in kwritev 
> iscsid: in nlpayload_read 
> iscsid: in nlpayload_read 
> iscsid: scanning host19 from pid 8774 
> iscsid: Connection3:0 to [target: iqn.2011-03.de.XXXX.in:iscsi- 
> backup.target1.lun1, portal: XXX.XXX.XXX.XXX,3260] through [iface: 
> iface] is operational now 
> iscsid: iscsid: scanning host19 
> thread removed 
>
> iscsid: scanning host19 completed 
>
> iscsid: mgmt_ipc_write_rsp: rsp to fd 5 
> iscsid: reaped pid 8774, reap_count now 0 
>
> I testes some different distributions and it works fine (including the 
> creation of /dev/sdX) on CentOS/RedHat but for example Ubuntu and 
> ArchLinux it won't work. 
>
> Has anyone some tips/ideas how to solve this, please? 
>
> kindly regards, 
>  Joern

-- 
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to open-iscsi+unsubscr...@googlegroups.com.
To post to this group, send email to open-iscsi@googlegroups.com.
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.

Reply via email to