On Thursday, March 17, 2016 at 6:32:34 AM UTC-7, z*@gmail.com wrote: > > Hi! > > I'm in trouble with "iscsi-initiator-utils" and my iscsi target. > I have a Dell T420 server and a Dell SCv2000 storage.The server is > installed with two NICs and "iscsi-initiator-utils" software. > The SCv2000 is the target I want to connect to.Each NIC has two > ports,however, the target seems to recognize only one port. > > After the installation of "iscsi-initiator-utils" , a file named > initiatorname.iscsi are created.In my view,iscsi will assign an initiator > name for the recognized port. > There is only one initiatorname in my file rather than four.I attemptted > to add initiatornames into it,but it was of no use. >
There is only one initiator name for your host, not one for each NIC or port. > > The initiator and the target were well configured once, but one of the two > NICs has some quality problems.I changed a new one and configured them as > before, > they crashed.I don't know what to do next.Can you help me? > Thx. > Now there's a crash? Can you share the iscsiadm command you are using? Please run it with "-d5" and share the result. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To post to this group, send email to open-iscsi@googlegroups.com. Visit this group at https://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.