problem description :
Target ： created a raid1 array use 8 disks,
Initiator :
The iscsi negotiation result :
ImmediateData=Yes
InitialR2T=Yes
FirstBurstLength=65536
MaxBurstLength=262144
MaxRecvDataSegmentLength=262144
In Initiator, we perform a iozone test (iozone -a -i 0 -i 2 -n 64g -g
64g -y 64K -q 64K -f /mnt/iot) on it,
and When running to random tests, the target report: "Unable to recover
from DataOut timeout while in ERL=0",
and the Initiator report : "connection1:0: detected conn error (1020)"
problem analysis :
Because FirstBurstLength=65536, In a 64k random write test，
A large amount of data is sent to the target through the Initiator
"conn->cmdqueue" queue,
If a merge request occurs at this time（The probability of merging in random
tests is very low),
and it will lead to have some data sent to the target through the
"conn->requeue" queue.
Because A large amount of data is sent to the target through the
"conn->cmdqueue" queue,
from the design of the iscsi_data_xmit function,
the "While (! List_empty (& conn->cmdqueue))" will always be true,
and ultimately make the "conn->requeue" queue can not be processed in time,
so the target will can not get the report, and cause a time-out.
and also, we can open the kernel debug and Extend the timeout, we can get
dmesg ( 64k random write test and occurs a merge request ) :
17:34:41 kylinOS kernel: Got SCSI Command, ITT: 0x00000015,
CmdSN: 0x8f500e00, ExpXferLen: 131072, Length: 65536, CID: 0
..............
17:34:41 kylinOS kernel: Built R2T, ITT: 0x00000015, TTT:
0x000ead3e, StatSN: 0x111c0410, R2TSN: 0x00000000, Offset: 65536, DDTL: 65536,
CID: 0
17:34:41 kylinOS kernel: ret: 48, sent data: 48
17:34:41 kylinOS kernel: Starting DataOUT timer for ITT:
0x00000015 on CID: 0, timeout:203.
17:34:41 kylinOS kernel: Updated MaxCmdSN to 0x000e50c4
...........
17:34:47 kylinOS kernel: Got DataOut ITT: 0x00000015, TTT:
0x3ead0e00, DataSN: 0x00000000, Offset: 65536, Length: 65536, CID: 0
17:34:47 kylinOS kernel: Updated DataOUT timer for ITT:
0x00000015, timeout:203.
..........
17:34:47 kylinOS kernel: Stopped DataOUT Timer for ITT:
0x00000015
as you see, the merge request(128K) "ITT: 0x00000015", Delay 6S to complete
So I think the iscsi_data_xmit function need to modify to reduce I/O delay
and unnecessary time-out.
problem solutions ：
We should add a timeout mechanism to the while loop :
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index c051694..77108fe 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1492,6 +1492,8 @@ EXPORT_SYMBOL_GPL(iscsi_requeue_task);
static int iscsi_data_xmit(struct iscsi_conn *conn)
{
struct iscsi_task *task;
+ unsigned long cmd_timeout = 0;
+ unsigned long req_timeout = 0;
int rc = 0;
spin_lock_bh(&conn->session->frwd_lock);
@@ -1530,8 +1532,11 @@ check_mgmt:
goto done;
}
+check_cmd:
/* process pending command queue */
- while (!list_empty(&conn->cmdqueue)) {
+ if (!cmd_timeout)
+ cmd_timeout = jiffies + HZ/2; /* timeout in 0.5s */
+ while (!list_empty(&conn->cmdqueue) && time_before(jiffies,
cmd_timeout)) {
conn->task = list_entry(conn->cmdqueue.next, struct iscsi_task,
running);
list_del_init(&conn->task->running);
@@ -1562,7 +1567,10 @@ check_mgmt:
goto check_mgmt;
}
- while (!list_empty(&conn->requeue)) {
+check_req:
+ if (!req_timeout)
+ req_timeout = jiffies + HZ/2; /* timeout in 0.5s */
+ while (!list_empty(&conn->requeue) && time_before(jiffies,
req_timeout)) {
/*
* we always do fastlogout - conn stop code will clean up.
*/
@@ -1583,6 +1591,15 @@ check_mgmt:
if (!list_empty(&conn->mgmtqueue))
goto check_mgmt;
}
+
+ /* Check whether there are data needs to be sent */
+ cmd_timeout = 0;
+ req_timeout = 0;
+ if (!list_empty(&conn->cmdqueue))
+ goto check_cmd;
+ if (!list_empty(&conn->requeue))
+ goto check_req;
+
spin_unlock_bh(&conn->session->frwd_lock);
return -ENODATA;
Do you have any idea on this problem?
Looking forward to your answer!
thank you!
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.
