HI Hope you’re doing great.
Please find the requirement below and If you’re interested please apply with your word format resume and fill the below details. We need to close this position ASAP, appreciate your immediate response. *Need to have Automotive domain experience AND NO OPT EAD * *NOTE:06-10-2016 AND 07-10-2016 I AM IN LEAVE ,YOU CAN REACH TO [email protected] <[email protected]> (732-343-7688 X 3008)* *Sr. Core Electrical Engineer* *Location – Southfield, MI* *Duration – 18 Months+* BSEE required. 8 – 12 years’ experience in Automotive Electronics Job Description · Experiences with circuit design for automotive electronic control units, including analog circuit design. · Experience required with MOSFETs driving inductive loads (motors, solenoids, fuel injectors, and switch mode power supplies.) Also, related transient analysis. · Experiences in electronics design tools such as: Circuit Simulator, CAD and lab equipment and procedures (power supply, signal generators, scopes, and soldering) are required. · Knowledge in EMC is essential. (Design approaches for EMC robustness, and experience with EMC testing and problem solving, etc.) · Knowledge in discrete electronic components and semiconductor technologies is essential. · Experiences with Quality Management Systems, Circuit Development Process, FMEA and circuit manufacturing process. Job Duties · Circuit analysis including worst case, monte-carlo, etc. Interface with ECAD for circuit board layout, compliance with Manufacturing Design Rules. · Control and release Electrical BOM. · Work with product assurance to develop test specifications on required test equipment. · Lead EMC activities to ensure compliance and final approvals from customer. · Interface with suppliers for development of component specifications, resolving open issues and ensure part availability. · Identification and implementation of all necessary design changes. Participate in design reviews. · Perform electrical development of bench testing. · Documentation of all aspects in the product development process. · Development of hardware/software interface specifications. · Lead design reviews with peers and Technical Specialists. · Design change tracking. *Location – Southfield, MI* *Electrical - Hardware Validation Engineer* *Mid-Level * *Duration – 18 Months+* · *Three plus years of related job experience desired, automotive safety and restraint systems experience preferred.* · Knowledge of electronic design and assembly, test systems, test methodologies, and use of test equipment in the automotive industry desired. · Skilled in computer office applications such as Excel, Word, PowerPoint, Project,and Visio. · Strong interpersonal skills to work in a team environment. · Strong verbal and written communication skills. · Strong problem solving skills to aid in analysis and physical troubleshooting of electronic products. Job Description · Plan and conduct design assessments, inspections, and reviews of assigned products and requirements. · Develop Design Validation Tests (DVT) and Design and/or Process Validation Plans (DVP, PVP). Negotiate start and completion dates, schedule testing, and seek customer approval for plans and timing. · Define test equipment; quote various test equipment vendors, select appropriate vendors, and coordinate the procurement of Design Verification test equipment. · Ensure capability and performance of all test equipment and facilities. · Execute developmental, Design and/or Process Validation, Key-Life, design characterization and limit/margin testing with project team(s) and testing labs (internal & external), as necessary. · Generate developmental, Design and/or Process Validation reports (DVP&R, PVP&R) and distribute, as required. Initiate and support any test issue 8D’s and work with project teams through issue resolution. · Generate, release and update Engineering Specifications. Support Manufacturing In-Process (IP) Test development, application and optimization. · Support Manufacturing Engineers on assigned project team(s). Develop and maintain product critical and significant characteristic lists. · Develop EMC testing plans and seek necessary customer approvals. Coordinate and support EMC testing for Developmental, DV and PV testing with appropriate testing facilities. Document & archive as required. · Work with Product Design teams to develop appropriate test coverage mapped to customer and internal requirements. Collect and organize the test data for all levels of testing, as required. · Support the design teams with FMEA and requirements traceability development. Support product technical design reviews. · Assure customer confidentiality in all communications and actions. · Troubleshoot concerns with test equipment and coordinate the efforts to repair or update the equipment when necessary. · Work independently, and in conjunction with the project team, as required. *PCB Algo Software Engineer* *Location – Southfield, MI* *Duration – 18 Months+* - Need 6 – 12 yrs of exp candidates Location Southfield, MI Responsibilities The engineer is responsible for Embedded Software Development for Safety Critical Applications. - Automotive Domain experience - CAN/UDS Automotive Protocol - Strong Embedded C programming skills in Auto domain (other domain experience will not be considered relevant) - ECU system understanding - HW/SW Interface understanding - S/w Design Exp is a must - Other than this general ppl management skills, good commn skills etc Job Responsibilities · Analyze and review requirements. · Develop modular software for embedded 8/16/32 bit microprocessors/controllers. ·AUTOSAR-based software component development. · Software component configuration · Software application integration, make/build tools · Track Software Development with Agile-based workflow · Potential SW Application lead for project starting fall 2016 ·Write unit/development test plans and conduct unit/development tests. ·Interface with product development teams. ·Specific knowledge of automotive protocols (UDS, CAN, GM LAN, FNOS) ·Champion the quality, design, development and release of assigned software project elements in accordance of a process. ·Establish and adhere to estimates in project work plan for assigned tasks. ·Provide regular updates of assigned task progression to software lead for project planning, tracking and oversight. ·Identify or propose product process or infrastructure improvements. ·Contribute status, relevant data and constructive opinion at team/section meetings; Exemplify consensus building and team-focused behavior. ·Tools (a plus): Eclipse, Processor Tools: Tasking Compiler, Debugger, Emulator, Simulator, QAC, and PTC Integrity Manager and Source Integrity *Functional Safety Engineer - ECU Subsystem* *Location – Southfield, MI* *Duration – 18 Months+* Job Description · Highly organized with good oral and written communication skills · Performing and managing functional safety activities in accordance with a safety standard; preferably ISO 26262 with an emphasis on Parts 4, 5 and 6. · Performing and leading safety analysis; FMEA, FMEDA, FTA, DFA (Dependent Failure Analysis) · Embedded electronics development experience; preferably safety electronics · Ability to develop requirements utilizing PC level tools · Ability to read and interpret electrical schematics and component specifications · Ability to read and understand high level SW models and code · Ability to read and understand high level System models · · Participate in HW metrics activities compliant to ISO 26262 · · Participate in subsystem safety analysis using FMEA and Quantified FTA methods. · · Work with reliability engineering to develop HW component FIT estimations · · Work with component suppliers regarding Safety Manual, FMEDA, · safety mechanism(s) capability, BIST, etc. *Electronics system Engineer* *Location – Southfield, MI* *Duration – 18 Months+* Candidate should have 5 years to 10 years (preferred) experience as a systems engineer; preferably in an automotive environment. Alternatively, consideration granted to candidates with both HW and SW design experience at the architecture level. Experience employing ISO26262 concepts and/or other Functional Safety concepts. Desired skills and responsibilities: · Function analysis at system and sub-system level including FMEA, FTA, and ASIL · decomposition. · Requirements capturing and analysis at the system and sub-system level · System functional modeling, preferably utilizing a modeling language (E.g. UML, SysML) · Requirements specification preferably utilizing a requirement management tool (E.g. DOORS) · Development of system design specifications · Specification of validation and verification testing and strategies · Able to communicate and contribute in a team environment, and take in others people’s views · Good documentation and organization skills · Able to support technical discussions with internal and external customers · Effective presentation and writing skills · Knowledge and practice of development standards, especially ISO26262 · Knowledge of automotive controls systems design, especially braking systems. · Knowledge of automotive embedded systems, sensors and communication interfaces · Knowledge of safety strategies and diagnostics used in automotive control systems · Knowledge regarding hardware and software implementation for embedded systems · Knowledge of FMEA and FTA methods · Performance of system and subsystem analyses to support effective design of embedded systems for automotive applications. These systems include electronic and electro-mechanical components. Duties include, but are not limited to, the development of functional models, analysis and specification of requirements, the creation of FMEA and FTA analyses, and the creation of specifications and other system related documents. · Experienced electronic systems engineer to conduct system analyses and to analyze customer and internal documents to create system requirements and specifications to create a design for automotive motion control systems. *NOTE:06-10-2016 AND 07-10-2016 I AM IN LEAVE ,YOU CAN REACH TO [email protected] <[email protected]> (732-343-7688 X 3008)* *Thanks for your Time and Support* *Rajesh | Technical Recruiter* *Software Programming Group* *15 Corporate Place South, Suite #421, Piscataway, NJ - 08854* *Tel: 732-343-7688 x 3049 || Fax: 732-343-7689* *Email: |[email protected] <%[email protected]> | URL : www.spgamerica.com <http://www.spgamerica.com/> * *Hangout:bvrajeshgowd* *IT Services || Consulting* *USA || INDIA* -- You received this message because you are subscribed to the Google Groups "Open Source Erp & Crm" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/open-source-erp-crm. For more options, visit https://groups.google.com/d/optout.
