We discovered a machine crash during the start of the openafs-1.2.6-rc1
client on one of our dual PIII boxes, running SuSE 7.2 and a vanilla
2.4.18 kernel with the lkcd- and perfctr- patches. Please find the crash
report attached to this mail.
After the reboot the second try to start openafs-1.2.6-rc1 failed with
the following error message:
BUG IN DYNAMIC LINKER ld.so: dynamic-link.h: 62: elf_get_dynamic_info:
Assertion '!"bad dynamic tag"' failed
Regards
Herbert
Initializing vmdump access ... Done.
Loading system map ... Done.
Loading type info (Kerntypes) ... Done.
Initializing arch specific data ... Done.
Loading ksyms from dump ......... Done.kl_read_syminfo: Warning: Unknown
symbol type 'U'; ignoring
=======================
LCRASH CORE FILE REPORT
=======================
GENERATED ON:
Tue Jul 23 13:38:02 2002
TIME OF CRASH:
Tue Jul 23 13:29:21 2002
PANIC STRING:
Oops
MAP:
map.1
DUMP:
dump.1
KERNTYPES:
kerntypes.1
================
COREFILE SUMMARY
================
The system died due to a software failure.
===================
UTSNAME INFORMATION
===================
sysname : Linux
nodename : lxsrv1
release : 2.4.18
version : #1 SMP Tue Jul 9 10:17:07 CEST 2002
machine : i686
domainname :
===============
LOG BUFFER DUMP
===============
<4>Linux version 2.4.18 (root@lxsrv1) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP
Tue Jul 9 10:17:07 CEST 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
<4> BIOS-e820: 000000007fff0000 - 000000007fffec00 (ACPI data)
<4> BIOS-e820: 000000007fffec00 - 000000007ffff000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>1151MB HIGHMEM available.
<4>found SMP MP-table at 000fe710
<4>hm, page 000fe000 reserved twice.
<4>hm, page 000ff000 reserved twice.
<4>hm, page 000f0000 reserved twice.
<4>On node 0 totalpages: 524272
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 294896 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: DELL Product ID: POWEREDGE D1 APIC at: 0xFEE00000
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>I/O APIC #3 Version 17 at 0xFEC01000.
<4>Processors: 2
<4>Kernel command line: BOOT_IMAGE=linux.2.4.18 ro root=809
BOOT_FILE=/boot/vmlinuz-2.4.18_PIII console=tty0 console=ttyS0,115200
<6>Initializing CPU#0
<4>Detected 931.029 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1854.66 BogoMIPS
<4>Memory: 2060920k/2097088k available (1600k kernel code, 35784k reserved, 598k
data, 260k init, 1179584k highmem)
<4>Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
<4>dump: Registering dump compression type 0x0
<4>dump: mbank[0]: type:1, phys_addr: 0 ... 7ffeffff
<4>dump: Crash dump driver initialized.
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 0a
<4>per-CPU timeslice cutoff: 731.28 usecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000040
<4>ESR value after enabling vector: 00000000
<4>Booting processor 1/0 eip 2000
<6>Initializing CPU#1
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 1861.22 BogoMIPS
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU1: Intel Pentium III (Coppermine) stepping 0a
<6>Total of 2 processors activated (3715.89 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<4>Setting 2 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Setting 3 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 3 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 3-10, 3-11, 3-12, 3-13 not
connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<3>..MP-BIOS bug: 8254 timer not connected to IO-APIC
<6>...trying to set up timer (IRQ0) through the 8259A ...
<4>..... (found pin 0) ...works.
<7>number of MP IRQ sources: 30.
<7>number of IO-APIC #2 registers: 16.
<7>number of IO-APIC #3 registers: 16.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 000F0011
<7>....... : max redirection entries: 000F
<7>....... : PRQ implemented: 0
<7>....... : IO APIC version: 0011
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 003 03 0 0 0 0 0 1 1 31
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 000 00 1 0 0 0 0 0 0 00
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 003 03 0 0 0 0 0 1 1 51
<7> 07 003 03 0 0 0 0 0 1 1 59
<7> 08 003 03 0 0 0 0 0 1 1 61
<7> 09 003 03 0 0 0 0 0 1 1 69
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 003 03 0 0 0 0 0 1 1 71
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 003 03 0 0 0 0 0 1 1 79
<7> 0f 003 03 0 0 0 0 0 1 1 81
<4>
<7>IO APIC #3......
<7>.... register #00: 03000000
<7>....... : physical APIC id: 03
<7>.... register #01: 000F0011
<7>....... : max redirection entries: 000F
<7>....... : PRQ implemented: 0
<7>....... : IO APIC version: 0011
<7>.... register #02: 0E000000
<7>....... : arbitration: 0E
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 003 03 1 1 0 1 0 1 1 89
<7> 01 003 03 1 1 0 1 0 1 1 91
<7> 02 003 03 1 1 0 1 0 1 1 99
<7> 03 003 03 1 1 0 1 0 1 1 A1
<7> 04 003 03 1 1 0 1 0 1 1 A9
<7> 05 003 03 1 1 0 1 0 1 1 B1
<7> 06 003 03 1 1 0 1 0 1 1 B9
<7> 07 003 03 1 1 0 1 0 1 1 C1
<7> 08 003 03 1 1 0 1 0 1 1 C9
<7> 09 003 03 1 1 0 1 0 1 1 D1
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 000 00 1 0 0 0 0 0 0 00
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 003 03 1 1 0 1 0 1 1 D9
<7> 0f 003 03 1 1 0 1 0 1 1 E1
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ12 -> 0:12
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 1:0
<7>IRQ17 -> 1:1
<7>IRQ18 -> 1:2
<7>IRQ19 -> 1:3
<7>IRQ20 -> 1:4
<7>IRQ21 -> 1:5
<7>IRQ22 -> 1:6
<7>IRQ23 -> 1:7
<7>IRQ24 -> 1:8
<7>IRQ25 -> 1:9
<7>IRQ30 -> 1:14
<7>IRQ31 -> 1:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 930.9893 MHz.
<4>..... host bus clock speed is 132.9982 MHz.
<4>cpu: 0, clocks: 1329982, slice: 443327
<4>CPU0<T0:1329968,T1:886640,D:1,S:443327,C:1329982>
<4>cpu: 1, clocks: 1329982, slice: 443327
<4>CPU1<T0:1329968,T1:443312,D:2,S:443327,C:1329982>
<4>checking TSC synchronization across CPUs: passed.
<4>Waiting on wait_init_idle (map = 0x2)
<4>All processors have done init_idle
<4>PCI: PCI BIOS revision 2.10 entry at 0xfc73e, last bus=3
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Discovered primary peer bus 01 [IRQ]
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Discovered primary peer bus 02 [IRQ]
<6>PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0
<6>PCI->APIC IRQ transform: (B1,I8,P0) -> 17
<6>PCI->APIC IRQ transform: (B2,I2,P0) -> 31
<6>PCI->APIC IRQ transform: (B2,I4,P0) -> 16
<6>PCI->APIC IRQ transform: (B3,I4,P0) -> 31
<6>PCI->APIC IRQ transform: (B3,I4,P1) -> 30
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<6>Journalled Block Device driver loaded
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=32
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
<4>ServerWorks OSB4: chipset revision 0
<4>ServerWorks OSB4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
<4>hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.12
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>loop: loaded (max 8 devices)
<4>eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
<4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
<6>eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:06:5B:04:4A:FE, IRQ 16.
<6> Receiver lock-up bug exists -- enabling work-around.
<6> Board assembly 07195d-000, Physical connectors present: RJ45
<6> Primary interface chip i82555 PHY #1.
<6> General self-test: passed.
<6> Serial sub-system self-test: passed.
<6> Internal registers self-test: passed.
<6> ROM checksum self-test: passed (0x04f4518b).
<6> Receiver lock-up workaround activated.
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 816M
<7>agpgart: no supported devices found.
<6>[drm] Initialized tdfx 1.0.0 20010216 on minor 0
<6>[drm] Initialized radeon 1.1.1 20010405 on minor 1
<6>SCSI subsystem driver Revision: 1.00
<6>Red Hat/Adaptec aacraid driver, Jul 9 2002
<6>scsi0 : percraid
<4> Vendor: DELL Model: PERCRAID Mirror Rev: 0001
<4> Type: Direct-Access ANSI SCSI revision: 02
<6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<4> <Adaptec aic7899 Ultra160 SCSI adapter>
<4> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
<4>
<4>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
<4>SCSI device sda: 35544576 512-byte hdwr sectors (18199 MB)
<4>sda: Write Protect is off
<6>Partition check:
<6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
<4>dump: Registering dump compression type 0x1
<4>dump: Registering dump compression type 0x2
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<6>perfctr: driver 2.3.7, cpu type Intel Pentium III at 931029 kHz
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 16384 buckets, 128Kbytes
<4>TCP: Hash tables configured (established 262144 bind 65536)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>ds: no socket drivers loaded!
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 260k freed
<4>dump: dump_compress = 0
<4>dump: dump_blk_shift:12, PAGE_SHIFT:12
<4>
<4>dump: dump device 0x802 opened; Ready to take a save a core dump
<6>Adding Swap: 2097136k swap-space (priority -1)
<6>Adding Swap: 2097136k swap-space (priority -2)
<4>Starting AFS cache scan...Memory cache: Allocating 16000 dcache entries...found
0 non-empty cache files (0%).
<4>WARM shutting down of: CB... afs... BkG... CTrunc... AFSDB... RxEvent...
RxListener...
<4>Starting AFS cache scan...afs_osi_Alloc: Can't vmalloc 8192 bytes.
<4>afsd: memCache allocation failure at 56320 KB.
<4>afsd: memory cache too large for available memory.
<4>afsd: AFS files cannot be accessed.
<4>
<4>afs_osi_Alloc: Can't vmalloc 308 bytes.
<4>rxi_Alloc error<1>Unable to handle kernel paging request at virtual address
ffffffff
<4> printing eip:
<4>f8a54a39
<1>*pde = 00003063
<1>*pte = 00000000
<4>Oops: 0002
<4>CPU: 0
<4>EIP: 0010:[<f8a54a39>] Not tainted
<4>EFLAGS: 00010246
<4>eax: 0000000f ebx: 00000134 ecx: c0308e6c edx: 0000003d
<4>esi: 00000000 edi: f8a84c60 ebp: f8a84c60 esp: dcf05b74
<4>ds: 0018 es: 0018 ss: 0018
<4>Process afsd (pid: 23808, stackpage=dcf05000)
<4>Stack: f8a7692d ea9a23e0 de3510e0 f8a47633 de3510e0 ea9a23e0 0000001b f8a470b8
<4> f8a7692d ea9a23e0 de3510e0 f8a47633 f8a84c48 00000000 00000000 f8a475b3
<4> 530ebb81 0000581b 00000000 f8a46c7d 00000134 f8a7b020 dcf04000 00000000
<4>Call Trace: [<f8a7692d>] [<f8a47633>] [<f8a470b8>] [<f8a7692d>] [<f8a47633>]
<4> [<f8a84c48>] [<f8a475b3>] [<f8a46c7d>] [<f8a7b020>] [<f8a47f11>]
[<f8a7b020>]
<4> [<f8a7b020>] [<f8a55512>] [<f8a7b4a8>] [<f8a642b8>] [<c01071dc>]
[<f8a7b020>]
<4> [<c028ae4e>] [<c015384c>] [<c0154885>] [<c0153f54>] [<c011242a>]
[<c01a3d85>]
<4> [<c01a3d85>] [<c012ebdf>] [<c0123dcf>] [<c0123dfa>] [<c0124503>]
[<c0111c64>]
<4> [<c0111ae8>] [<f8a65ccd>] [<c01070eb>]
<4>
<4>Code: c6 05 ff ff ff ff 2a 83 c4 10 83 c4 0c c3 90 55 57 56 53 8b
<4>
<4>dump: Dumping to device 0x802 [sd(8,2)] on CPU 0 ...
<4>dump: Compression value is 0x0, Writing dump header
<4>
<4>dump: Pass 1: Saving Reserved Pages:
<4>dump: Memory Bank[0]: 0 ... 7ffeffff: \-/|
====================
CURRENT SYSTEM TASKS
====================
ADDR UID PID PPID STATE FLAGS CPU NAME
===============================================================================
0xc0326000 0 0 0 0 0x100 - swapper
0xc303c000 0 1 0 1 0x100 - init
0xc302c000 0 2 1 1 0x40 - keventd
0xc302a000 0 3 0 0 0x40 - ksoftirqd_CPU0
0xc3028000 0 4 0 1 0x40 - ksoftirqd_CPU1
0xf7bf8000 0 5 0 1 0x840 - kswapd
0xf7bd6000 0 6 0 1 0x40 - bdflush
0xf7bd4000 0 7 0 1 0x40 - kupdated
0xf7ba4000 0 9 1 1 0x40 - aacraid
0xf7b72000 0 10 1 1 0x40 - scsi_eh_1
0xf27c2000 1 263 1 1 0x140 - portmap
0xf1f5a000 0 288 1 0 0x140 - syslogd
0xee8b2000 0 290 1 1 0x140 - sshd
0xf238e000 0 293 1 0 0x140 - klogd
0xf629c000 0 320 1 1 0x140 - rpc.statd
0xeece6000 0 322 1 1 0x40 - rpciod
0xee048000 0 323 1 1 0x40 - lockd
0xe6a92000 0 440 1 1 0x140 - xntpd
0xf7a2c000 0 447 440 0 0x40 - xntpd
0xe98d0000 0 448 447 0 0x40 - xntpd
0xe5df4000 0 449 440 1 0x40 - xntpd
0xf08da000 0 476 1 1 0x40 - cron
0xf08f4000 0 499 1 1 0x40 - nscd
0xe6228000 0 503 499 0 0x40 - nscd
0xf08c4000 0 504 503 1 0x40 - nscd
0xf08f6000 0 505 503 1 0x40 - nscd
0xf08b2000 0 506 503 1 0x40 - nscd
0xf08b0000 0 507 503 1 0x40 - nscd
0xf08a2000 0 508 503 1 0x40 - nscd
0xf0928000 0 530 1 1 0x140 - inetd
0xf08a0000 0 555 1 1 0 - grid-info-soft-
0xf0986000 0 582 555 1 0x100 - slapd
0xf096e000 0 596 1 1 0 - grid-info-soft-
0xf0952000 0 640 1 1 0x40 - cod_commd
0xf0984000 0 641 582 0 0x40 - slapd
0xf096c000 0 642 641 1 0x40 - slapd
0xf0958000 0 644 1 1 0x40 - cod_execd
0xf098e000 0 647 1 1 0x40 - cod_shadowd
0xf7b0e000 0 880 1 1 0x100 - mingetty
0xf7a34000 0 881 1 1 0x100 - mingetty
0xf095a000 0 882 1 1 0x100 - mingetty
0xf098c000 0 883 1 1 0x100 - mingetty
0xf09aa000 0 884 1 1 0x100 - mingetty
0xf09a8000 0 885 1 1 0x100 - mingetty
0xf0adc000 0 1102 290 1 0x140 - sshd
0xf0942000 0 1104 1102 1 0x100 - bash
0xf0a50000 0 1139 1 1 0x100 - mgetty
0xddba2000 0 7609 641 1 0x40 - slapd
0xd8ff6000 0 8827 290 0 0x140 - sshd
0xe1ee6000 0 8837 8827 1 0x100 - bash
0xe1248000 0 9713 8837 1 0 - qmon
0xf099c000 0 17749 290 1 0x140 - sshd
0xe167c000 0 17779 17749 1 0x100 - bash
0xf0a22000 0 20983 17779 1 0x100 - clusterview
0xf0a20000 0 20992 20983 0 0x100 1 sr8000view.exe
0xdd33a000 0 22588 596 1 0 - sleep
0xf0ade000 0 23803 1104 1 0 - rc.afs
0xe231a000 0 23807 23803 0 0x100 - afsd
0xdcf04000 0 23808 23807 0 0x140 0 afsd
0xe1ab2000 0 23809 23807 1 0x140 - afsd
0xf0a34000 0 23810 23807 1 0x140 - afsd
0xd7f22000 0 23811 23807 1 0x140 - afsd
0xf083c000 0 23812 23807 1 0x140 - afsd
0xf092a000 0 23813 23807 1 0x140 - afsd
0xdd76e000 0 23814 23807 1 0x140 - afsd
0xf09ce000 0 23815 2ZERO SIZE!!
3807 1 0x140 - afsd
0xf09cc000 0 23816 23807 1 0x140 - afsd
0xf0b1e000 0 23817 23807 1 0x140 - afsd
0xf0b1c000 0 23818 23807 1 0x140 - afsd
===========================
STACK TRACE OF FAILING TASK
===========================
================================================================
STACK TRACE FOR TASK: 0xdcf04000 (afsd)
================================================================
begin:vcard
n:Huber;Herbert
tel;work:089-289-28833
x-mozilla-html:FALSE
url:http:/www.lrz.de/
org:Leibniz-Rechenzentrum;Gruppe Hochleistungssysteme
adr:;;Leibniz-Rechenzentrum der Bayerischen Akademie der Wissenschafte;M�nchen;;D-80333;Germany
version:2.1
email;internet:[EMAIL PROTECTED]
title:Dr.
x-mozilla-cpt:;-12480
fn:Herbert Huber
end:vcard
