Well i did:
udebug myserver 7002
Host's addresses are: ip-myserver
Host's ip-myserver time is Wed Jul 23 19:47:26 2008
Local time is Wed Jul 23 19:47:29 2008 (time differential 3 secs)
Last yes vote for ip-myserver2 was 24 secs ago (sync site);
Last vote started 24 secs ago (at Wed Jul 23 19:47:05 2008)
Local db version is 1214806124.7
I am not sync site
Lowest host ip-myserver2 was set 24 secs ago
Sync host ip-myserver2 was set 24 secs ago
Sync site's db version is 1214806124.7
0 locked pages, 0 of them for write
udebug myserver 7003
Host's addresses are: ip-myserver
Host's ip-myserver time is Wed Jul 23 19:49:34 2008
Local time is Wed Jul 23 19:49:35 2008 (time differential 1 secs)
Last yes vote for ip-myserver was 44 secs ago (not sync site);
Last vote started 44 secs ago (at Wed Jul 23 19:48:51 2008)
Local db version is 1216833173.3
I am not sync site
Lowest host ip-myserver2 was set 5 secs ago
Sync host 0.0.0.0 was set 154 secs ago
Sync site's db version is 1216833173.3
0 locked pages, 0 of them for write
and on myserver2:
udebug myserver2 7002
Host's addresses are: ip-myserver2
Host's ip-myserver2 time is Wed Jul 23 19:56:38 2008
Local time is Wed Jul 23 19:56:39 2008 (time differential 1 secs)
Last yes vote for ip-myserver2 was 6 secs ago (sync site);
Last vote started 6 secs ago (at Wed Jul 23 19:56:33 2008)
Local db version is 1214806124.7
I am sync site until 51 secs from now (at Wed Jul 23 19:57:30 2008) (2
servers)
Recovery state 1f
Sync site's db version is 1214806124.7
0 locked pages, 0 of them for write
Server (ip-myserver): (db 1214806124.7)
last vote rcvd 9 secs ago (at Wed Jul 23 19:56:30 2008),
last beacon sent 6 secs ago (at Wed Jul 23 19:56:33 2008), last
vote was yes
dbcurrent=1, up=1 beaconSince=1
udebug myserver2 7003
Host's addresses are: ip-myserver2
Host's ip-myserver2 time is Wed Jul 23 19:57:50 2008
Local time is Wed Jul 23 19:57:50 2008 (time differential 0 secs)
Last yes vote for ip-myserver2 was 3 secs ago (sync site);
Last vote started 3 secs ago (at Wed Jul 23 19:57:47 2008)
Local db version is 1216835658.20
I am sync site until 56 secs from now (at Wed Jul 23 19:58:46 2008) (2
servers)
Recovery state 1f
Sync site's db version is 1216835658.20
0 locked pages, 0 of them for write
Last time a new db version was labelled was:
212 secs ago (at Wed Jul 23 19:54:18 2008)
Server (ip-myserver): (db 1216835658.20)
last vote rcvd 4 secs ago (at Wed Jul 23 19:57:46 2008),
last beacon sent 3 secs ago (at Wed Jul 23 19:57:47 2008), last
vote was yes
dbcurrent=1, up=1 beaconSince=1
The system on myserver (the first one) is now running again but if i
try to create a user i still get:
pts: database needs rebuilding ; unable to create user TESTUSER with
id 3563
Volume 536872154 created on partition /vicepa of myserver
Released volume cell.user successfully
fs: Invalid argument, possible reasons include:
-File not in AFS
-Too many users on access control list
-Tried to add non-existent user to access control list
pts: User or group doesn't exist ; unable to add user TESTUSER to
group TESTGROUP
pts: User or group doesn't exist ; unable to add user TESTUSER to
group TESTAFSUSER
Added replication site myserver /vicepa for volume user. TESTUSER
Could please someone tell me how to rebuild the protection database?
I cant bos on myserver2 because i dont get a ticket from kerberos.
or does /etc/init.d/openafs-client stop and /etc/init.d/openafs-
fileserver stop the job to stop the whole system?
thanks all for your help
kanou
Am 23.07.2008 um 19:30 schrieb Hartmut Reuter:
kanou wrote:
My logs on the second machine tell me:
==> /var/log/openafs/FileLog.old <==
Wed Jul 23 19:03:37 2008 File server starting
Wed Jul 23 19:03:37 2008 afs_krb_get_lrealm failed, myserver2.
Wed Jul 23 19:03:37 2008 VL_RegisterAddrs rpc failed; will retry
periodically (code=5376, err=4)
code 5376 means no quorum elected. Are you sure your database
servers are all running?
Try "udebug <server> 7002" for the ptserver
and "udebug <server> 7003" for the vldb
Wed Jul 23 19:03:37 2008 Couldn't get CPS for AnyUser, will try
again in 30 seconds; code=267275.
==> /var/log/openafs/SalvageLog <==
07/23/2008 19:08:27 SALVAGING OF PARTITION /vicepa COMPLETED
and aklog gives me:
aklog: Couldn't get hrf.uni-koeln.de AFS tickets:
aklog: Cannot contact any KDC for requested realm while getting
AFS tickets
damn! i did not do anything on that second one!
Just to make sure you're working on the correct file:
As I understand you first deleted the file /var/lib/openafs/db/
prdb.DB0.
This file was then probably recreated when you restarted the
ptserver.
Run this command on the backupfile you made first (or better on a
copy of the backup file).
T/Christof
________________________________________
From: [EMAIL PROTECTED] [openafs-info- [EMAIL PROTECTED]
] On Behalf Of kanou [EMAIL PROTECTED]
Sent: Wednesday, July 23, 2008 6:46 PM
To: [email protected]
Subject: Re: [OpenAFS] Serious trouble, mounting /afs, ptserver,
database rebuilding
Thanks for your answer.
Well I found the file prdb_check. It doesnt print any errors. Only
thing I can find is with
./prdb_check -database /var/lib/openafs/db/prdb.DB0 -uheader -
verbose
this line:
Ubik header size is 0 (should be 64)
So there are no errors! I can start the server and everything runs
fine but the machine wont mount /afs!
kanou
Am 23.07.2008 um 17:26 schrieb Steven Jenkins:
On Wed, Jul 23, 2008 at 10:51 AM, kanou <[EMAIL PROTECTED]> wrote:
Hello,
well, there is a file called db_verify.c in the folder
/usr/src/modules/openafs/ptserver but I don' know how to build it.
If I recall correctly, db_verify gets renamed to 'prdb_check'
during
the install, so you should check for the existence of that file.
If you can't find it, you'll need to build it from source code: the
directions on the AFSLore wiki are a good place to start:
http://www.dementia.org/twiki/bin/view/AFSLore/HowToBuildOpenAFSFromSource
If you have problems building openafs-stable-1_4_x, you could get
openafs-stable-1_4_7 instead, as that is the latest official
release.
Once you have built the tree, src/ptserver/db_verify should get
built,
so you can simply copy it out of the source tree for your use.
If it
doesn't get built automatically for you, you can cd into src/
ptserver
and do a 'make db_verify' manuall.
Also, feel free to ask for help here or on the irc channel.
Steven Jenkins
End Point Corporation
http://www.endpoint.com/
_______________________________________________
OpenAFS-info mailing list
[email protected]
https://lists.openafs.org/mailman/listinfo/openafs-info
_______________________________________________
OpenAFS-info mailing list
[email protected]
https://lists.openafs.org/mailman/listinfo/openafs-info
--
-----------------------------------------------------------------
Hartmut Reuter e-mail [EMAIL PROTECTED]
phone +49-89-3299-1328
fax +49-89-3299-1301
RZG (Rechenzentrum Garching) web http://www.rzg.mpg.de/~hwr
Computing Center of the Max-Planck-Gesellschaft (MPG) and the
Institut fuer Plasmaphysik (IPP)
-----------------------------------------------------------------
_______________________________________________
OpenAFS-info mailing list
[email protected]
https://lists.openafs.org/mailman/listinfo/openafs-info
