I was following described in manual procedure for configuration and running
openAFS server. But somewhere I've made a mistake. All entries in my vldb
database points to 127.0.0.1 (which makes file servers inaccessible from all
clients except the server itself)
Some diagnostic output
/etc/hosts:
127.0.0.1 asu.aaa.bb dali.asu.aaa.bb dali localhost
asu.aaa.bb is the cell name and entry in cellservdb
vos listaddr -noresolve
192.168.1.128
192.168.0.250
Those addresses are correct
vos examine usr.username -noresolve
usr.username 536870921 RW 2 K On-line
asu.aaa.bb /vicepb
RWrite 536870921 ROnly 0 Backup 536870923
MaxQuota 22000000 K
Creation Mon Jun 18 15:36:09 2012
Copy Mon Jun 18 15:36:09 2012
Backup Mon Jun 18 16:07:44 2012
Last Access Mon Jun 25 11:56:13 2012
Last Update Thu Jun 21 17:33:55 2012
1 accesses in the past day (i.e., vnode references)
RWrite: 536870921 Backup: 536870923
number of sites -> 1
server 127.0.0.1 partition /vicepb RW Site
I'd like to rewrite the last string. I should get following instead of
127.0.0.1:
server 192.168.1.128 partition /vicepb RW Site
server 192.168.0.250 partition /vicepb RW Site
Fileserver must be accessible from both networks and should not point to
127.0.0.1 which is client-dependent.
What commands should be used to rewrite this portion of vldb info?
_______________________________________________
OpenAFS-info mailing list
[email protected]
https://lists.openafs.org/mailman/listinfo/openafs-info
