Hi Anatoly, Please ignore this message. I just found the problem. The hostname I used in the config did not match with the hostname I set in the node.
Regards, Wilson -----Original Message----- From: Wilson Talaugon [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 20, 2008 2:32 AM To: 'Anatoly Shirokov' Cc: '[email protected]' Subject: RE: [Openais] OpenAIS amf config for 2-node configuration Hi Anatoly, After removing the invalid parameter ais was able to run but it did not automatically instantiate the application. Below is my amf configuration based on your sample template. Kindly review my configuration and see if there's some problem with my configuration. Thanks. Regards, Wilson amf.conf ---------------------- # AMF Test configuration file # - Times in milliseconds # - clccli_path can be set on any level from application and down and will be # added to the CLI commands if they are not already specified with an absolute # path (begins with /). # WL - WorkLoad safAmfCluster = CLUSTER { saAmfClusterStartupTimeout=3000 safAmfNode = 192.168.10.210 { saAmfNodeSuFailOverProb=2000 saAmfNodeSuFailoverMax=10 } safAmfNode = 192.168.10.212 { saAmfNodeSuFailOverProb=2000 saAmfNodeSuFailoverMax=10 } safApp = DB { safSg = DBSG { saAmfSGRedundancyModel=nplusm saAmfSGNumPrefActiveSUs=1 saAmfSGMaxActiveSIsperSUs=1 saAmfSGNumPrefStandbySUs=1 saAmfSGMaxStandbySIsperSUs=1 saAmfSGCompRestartProb=100000 saAmfSGCompRestartMax=0 saAmfSGSuRestartProb=20000 saAmfSGSuRestartMax=0 saAmfSGAutoAdjustProb=5000 safSu = SERVICE2 { clccli_path=/home/twelly/ais/test saAmfSUHostedByNode=192.168.10.212 saAmfSUNumComponents=1 safComp = SERVER2 { saAmfCompCategory=sa_aware saAmfCompCapability=x_active_or_y_standby saAmfCompNumMaxActiveCsi=1 saAmfCompNumMaxStandbyCsi=1 saAmfCompDefaultClcCliTimeout = 500 saAmfCompDefaultCallbackTimeOut = 500 saAmfCompInstantiateCmd = /home/twelly/ais/test/clc_cli_script saAmfCompInstantiateCmdArgv= instantiate /home/twelly/ais/test/testamf saAmfCompTerminateCmd = /home/twelly/ais/test/clc_cli_script saAmfCompTerminateCmdArgv = terminate saAmfCompCleanupCmd = /home/twelly/ais/test/clc_cli_script saAmfCompCleanupCmdArgv = cleanup saAmfCompCsTypes { CSITYPE } saAmfCompCmdEnv { var1=val1 var2=val2 } saAmfCompRecoveryOnError=component_failover safHealthcheckKey = key1 { saAmfHealthcheckPeriod = 5000 saAmfHealthcheckMaxDuration = 350 } } } safSu = SERVICE1 { clccli_path=/home/twelly/ais/test saAmfSUHostedByNode=192.168.10.210 saAmfSUNumComponents=1 safComp = SERVER1 { saAmfCompCategory=sa_aware saAmfCompCapability=x_active_or_y_standby saAmfCompNumMaxActiveCsi=1 saAmfCompNumMaxStandbyCsi=1 saAmfCompDefaultClcCliTimeout = 500 saAmfCompDefaultCallbackTimeOut = 500 saAmfCompInstantiateCmd = /home/twelly/ais/test/clc_cli_script saAmfCompInstantiateCmdArgv= instantiate /home/twelly/ais/test/testamf saAmfCompTerminateCmd = /home/twelly/ais/test/clc_cli_script saAmfCompTerminateCmdArgv = terminate saAmfCompCleanupCmd = /home/twelly/ais/test/clc_cli_script saAmfCompCleanupCmdArgv = cleanup saAmfCompCsTypes { CSITYPE } saAmfCompCmdEnv { var1=val1 var2=val2 } saAmfCompRecoveryOnError=component_failover safHealthcheckKey = key1 { saAmfHealthcheckPeriod = 5000 saAmfHealthcheckMaxDuration = 350 } } } } safSi = SI { saAmfSINumCSIs=1 safCsi = CSI { saAmfCSTypeName = CSITYPE } } safCSType = CSITYPE { } } } -----Original Message----- From: Anatoly Shirokov [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 20, 2008 1:28 AM To: Wilson Talaugon Cc: [email protected] Subject: Re: [Openais] OpenAIS amf config for 2-node configuration Wilson Talaugon wrote: > > I tried your sample configuration and I get a segmentation fault in > amf_config_read(). It seems like it didn't like the following line: > saAmfNodeClmNode=node1 Ok, try to remove this parameter. Gook luck, Anatoly. _______________________________________________ Openais mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/openais
