>On Thu, Jul 23, 2009 at 8:32 PM, Steven Dake <[email protected]> wrote:
>I suggest mailing the pacemaker list with your question.
>
>I also suggest using corosync 1.0.0 release, since trunk is under
development.
Hi,
1.0.0 is working OK. But with trunk the pacemaker assertion failed because
the nodeid is 0 when pcmk is initialized. The pcmk gets nodeid by calling
totempg_my_nodeid_get() in corosync totem_pg library, so the issue is in the
corosync. The issue is the nodeid is 0 when pcmk service is initialized in
pcmk_startup(). Actually the nodeid is set after pcmk service is
initialized.
Since totem_config has read the binding network address from configuration,
I think it does not hurt to set nodeid during totem initialization before
services are initialized. I did a simple hack in trunk for this, it seems
working OK. Here are a patch for the hack.
Thanks
Index: totemudp.c
===================================================================
--- totemudp.c (revision 2370)
+++ totemudp.c (working copy)
@@ -1781,7 +1781,19 @@
timer_function_netif_check_timeout,
&instance->timer_netif_check_timeout);
- *udp_context = instance;
+ { // temp hack to get node ip address
+ int if_up, if_num;
+
+ netif_determine(instance,
+ &instance->totem_interface->bindnet,
+ &instance->totem_interface->boundto,
+ &if_up, &if_num);
+
+ log_printf (instance->totemudp_log_level_notice, "The
interface[%s] is if_up %d\n", totemip_print
(&instance->totem_interface->boundto), if_up);
+ }
+
+ *udp_context = instance;
+
return (0);
}
_______________________________________________
Openais mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/openais
