On Mon, 2010-02-08 at 11:13 -0700, hj lee wrote: > I noticed that this happens when corosync starts before syslog in init > start order. I understand that corosync requires syslog, but at least > it should start OK and should be operational OK even without syslog. >
thanks Would you file a defect indicating that corosync without a running syslog doesn't operate properly? Regards -steve > On Mon, Feb 8, 2010 at 10:59 AM, hj lee <[email protected]> wrote: > Hi, > > When corosync starts to fail with some reasons, multiple > corosync processes are created. But this does not help at all. > All these processes are stuck also. How or who does start > corosync multiple time? If it does, then it should kill the > corosync process before starting new corosync. > > Thanks > hj > > [r...@silverthorne4 tmp]# ps -ax | grep coro > Warning: bad syntax, perhaps a bogus '-'? > See /usr/share/doc/procps-3.2.7/FAQ > 3050 ? Ssl 0:00 /usr/sbin/corosync > 3084 ? S 0:00 /usr/sbin/corosync > 3085 ? S 0:00 /usr/sbin/corosync > 3087 ? S 0:00 /usr/sbin/corosync > 3088 ? S 0:00 /usr/sbin/corosync > 3089 ? S 0:00 /usr/sbin/corosync > 4571 pts/0 S+ 0:00 grep coro > > stack trace of 3050: > (gdb) bt > #0 0x00c5d402 in __kernel_vsyscall () > #1 0x0055d563 in __poll (fds=<value optimized out>, > nfds=<value optimized out>, timeout=<value optimized out>) > at ../sysdeps/unix/sysv/linux/poll.c:87 > #2 0x00703c36 in poll_run (handle=<value optimized out>) at > coropoll.c:377 > #3 0x0804c0fc in main (argc=Cannot access memory at address > 0x6 > ) at main.c:1082 > (gdb) info thread > 3 Thread 0xb7e54b90 (LWP 3051) 0x00c5d402 in > __kernel_vsyscall () > 2 Thread 0xb73f0b90 (LWP 3083) 0x00c5d402 in > __kernel_vsyscall () > * 1 Thread 0xb7f646c0 (LWP 3050) 0x00c5d402 in > __kernel_vsyscall () > (gdb) thread 2 > [Switching to thread 2 (Thread 0xb73f0b90 (LWP 3083))]#0 > 0x00c5d402 in __kernel_vsyscall () > (gdb) bt > #0 0x00c5d402 in __kernel_vsyscall () > #1 0x00612df6 in nanosleep () > from /lib/i686/nosegneg/libpthread.so.0 > #2 0x007ffbc8 in ?? () > from /usr/libexec/lcrso/pacemaker.lcrso > #3 0xb73f03a4 in ?? () > #4 0x00000000 in ?? () > (gdb) thread 3 > [Switching to thread 3 (Thread 0xb7e54b90 (LWP 3051))]#0 > 0x00c5d402 in __kernel_vsyscall () > (gdb) bt > #0 0x00c5d402 in __kernel_vsyscall () > #1 0x0060f615 in pthread_cond_wait@@GLIBC_2.3.2 () > from /lib/i686/nosegneg/libpthread.so.0 > #2 0x006fb35c in logsys_worker_thread (data=Could not find > the frame base for "logsys_worker_thread". > ) at logsys.c:716 > #3 0x0060b4d2 in start_thread (arg=<value optimized out>) at > pthread_create.c:297 > #4 0x0056748e in clone () from /lib/i686/nosegneg/libc.so.6 > > Stacktrace of rest of them: > (gdb) bt > #0 0x00c5d402 in __kernel_vsyscall () > #1 0x0060c607 in pthread_join (threadid=<value optimized > out>, thread_return=<value optimized out>) at > pthread_join.c:89 > #2 0x006fa815 in logsys_atexit () at logsys.c:1704 > #3 0x0804ca2b in sigsegv_handler (num=11) at main.c:196 > #4 <signal handler called> > #5 0x005265bb in __libc_fork () > at ../nptl/sysdeps/unix/sysv/linux/fork.c:48 > #6 0x00614cf4 in __fork () > at ../nptl/sysdeps/unix/sysv/linux/pt-fork.c:26 > #7 0x007fc49b in spawn_child () > from /usr/libexec/lcrso/pacemaker.lcrso > #8 0x00800566 in pcmk_startup () > from /usr/libexec/lcrso/pacemaker.lcrso > #9 0x0804e670 in corosync_service_link_and_init > (corosync_api=0x805a480, service_name=0x9455088 "pacemaker", > service_ver=0) > at service.c:179 > #10 0x0804e8dc in corosync_service_defaults_link_and_init > (corosync_api=0x805a480) at service.c:441 > #11 0x0804c8d5 in main_service_ready () at main.c:753 > #12 0x00711834 in main_iface_change_fn (context=<value > optimized out>, iface_addr=<value optimized out>, > iface_no=<value optimized out>) > at totemsrp.c:4253 > #13 0x00709f42 in rrp_iface_change_fn (context=Could not find > the frame base for "rrp_iface_change_fn". > ) at totemrrp.c:1422 > #14 0x007074c4 in timer_function_netif_check_timeout > (data=<value optimized out>) at totemudp.c:1359 > #15 0x00703e01 in poll_run (handle=<value optimized out>) at > tlist.h:309 > #16 0x0804c0fc in main (argc=6122908, argv=0x4a9c02) at > main.c:1082 > > > > -- > Peakpoint Service > > Cluster Setup, Troubleshooting & Development > [email protected] > (303) 997-2823 > _______________________________________________ > Openais mailing list > [email protected] > https://lists.linux-foundation.org/mailman/listinfo/openais _______________________________________________ Openais mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/openais
