I'm trying to configure corosync with two networks. The first network is "public" and uses a switch that is not configured to support multicast. The second network is a directly connected cable. Q1: Why do I have to specify multicast address and port when I'm using broadcast? Q2: Why does the ring fail on the second network even though I can ping each the other? Please see attach config and log files. Thanks! Alan
# ping 192.168.198.1
PING 192.168.198.1 (192.168.198.1) 56(84) bytes of data.
64 bytes from 192.168.198.1: icmp_seq=5 ttl=64 time=0.072 ms
64 bytes from 192.168.198.1: icmp_seq=6 ttl=64 time=0.122 ms
64 bytes from 192.168.198.1: icmp_seq=7 ttl=64 time=0.074 ms
--- 192.168.198.1 ping statistics ---
8 packets transmitted, 3 received, 62% packet loss, time 7000ms
rtt min/avg/max/mdev = 0.072/0.089/0.122/0.024 ms, pipe 2
# corosync-cfgtool -s
Printing ring status.
Local node ID 2047453376
RING ID 0
id = 192.168.9.122
status = ring 0 active with no faults
RING ID 1
id = 192.168.198.2
status = Marking seqid 126 ringid 1 interface 192.168.198.2 FAULTY
- adminisrtative intervention required.
tmp.tar.gz
Description: GNU Zip compressed data
_______________________________________________ Openais mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/openais
