SUCCESS! I think that I have finially figured out my blonde problems and I have it working on a VM. I am using the installer to configure Tomcat and OpenBD and then using the connector to bring in IIS. I will be putting together a tutorial and putting it up on the wiki soon.
Now, there is one hickup....I added index.cfm to the default documents, but when I just browse to mysite.local, I get nothing. All it says is that IE cannot display the page. No errors on nothing. If I browse to mysite.local/index.cfm it works just fine. Looking at the IIS doesn't show anything, so I looked at the redirector log and this is what is shows [Wed Nov 11 08:11:17.438 2009] [1616:3476] [error] jk_isapi_plugin.c (2215): could not get a worker for name odblb So there seems to be something that I am missing that the installer didn't catch. I have also noticed this same problem on the Windows 7 VM that I had. I blew that away because it was making me frustrated for other reasons, so I cannot see if the error is the same there, but it is the same symptoms. I am not familiar with Tomcat and how the workers are configure so where would I need to go to look into this problem? Thanks! On Thu, Nov 5, 2009 at 7:39 PM, Jordan Michaels <[email protected]>wrote: > > Hi Ben, > > You should be able to follow any directions on connecting IIS 6 to > Tomcat 6 using the isapi_redirect.dll connector. > > Here's one (it even uses CFML!): > http://www.cflex.net/showFileDetails.cfm?ObjectID=296 > > What directions were you following? Perhaps there's just a path issue > somewhere in the configs that you're using that is incompatible with the > paths that the installer sets up? > > Let us know, and we'll help as much as we can. =) > > Warm regards, > Jordan Michaels > Vivio Technologies > http://www.viviotech.net/ > Open BlueDragon Steering Committee > Adobe Solution Provider > > > Ben wrote: > > I am looking to get IIS 6 and OpenBD connected. I thought it would be > > great to get some directions made up for it since it hasn't been done > > yet, but I keep hitting a road block. First off, I used the installer > > to get everything put into place and configured quickly. I know that > > the installer works well on Windows 7 and even puts the connector into > > place. After completing that, I set out to put the connector into IIS > > and here is where my bumps come into place. After searching the > > forums I found quite a few websites that discuss making the > > connection. I followed the directions, but I still get the same > > results. Tomcat is working fine on 8888 and will go to the OpenBD > > admin console or whatever other virtual site I add into it, but when > > it comes in on port 80 I get a 500 error. I have tried repeatedy and > > even downloaded Tomcat and the connector seperatly to try and get it > > connected without Bluedragon involved, but still to no avail. Has > > anyone been able to get things working properly? > > > > Thanks! > > > > Ben > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ Open BlueDragon Public Mailing List http://groups.google.com/group/openbd?hl=en official site @ http://www.openbluedragon.org/ !! save a network - trim replies before posting !! -~----------~----~----~----~------~----~------~--~---
