It appears to be listening on port 8009 - I shut it down and checked and then restarted the service and it listed port 8009 - as LISTENING.
I read on another group to try and use the 32 bit connector instead of the 64 bit? Not confident that will help but I am going to try that next. Thanks, T On Nov 2, 1:35 pm, Jordan Michaels <[email protected]> wrote: > Hi Trevor, > > Well, the obvious question is when you start up OpenBD/Tomcat, is Tomcat > listening on port 8009? You can check this by running the windows > "netstat" command. > > netstat -n -p tcp > > ... if I recall correctly. > > Warm regards, > Jordan Michaels > Vivio Technologieshttp://www.viviotech.net/ > Open BlueDragon Steering Committee > Railo Community Distributions > > On 11/02/2010 09:43 AM, Trevor Burnette wrote: > > > > > > > > > I used the 1.3 windows installer for the installation. The BD admin > > console is working on port 8888. I configured it for the IIS default > > site on c:\inetpub\wwwroot\ to be the webroot. > > > I think the connector is configured correctly because if I bring down > > tomcat I get a service not available error. Otherwise I get a lot of > > errors in the isapi_redirect that look like this "Failed opening > > socket to (127.0.0.1:8009) (errno=61)" and it returns a 404 error. If > > anyone could point me in the right direction I would greatly > > appreciate it. -- Open BlueDragon Public Mailing List http://www.openbluedragon.org/ http://twitter.com/OpenBlueDragon official manual: http://www.openbluedragon.org/manual/ Ready2Run CFML http://www.openbluedragon.org/openbdjam/ mailing list - http://groups.google.com/group/openbd?hl=en
