Dear Peter and All, Do you have any idea or example of the ipaccess-config usage to how to download the firmware from BTS into your debian system .
Does the firmware comes from ipaccess already installed into NanoBTS or we install it ? >From the below link http://openbsc.osmocom.org/trac/wiki/ipaccess-config I understand that we only have to configure the Unit-id and Oml Address right and I understand that the firmware is already installed . I have tried the following : ipaccess-config -f FIRMWARE -w and sure it doesn't work :) . And I also read the -w argument options that needs to be used to download the firmware from BTS into debian system it should be used with -f . Is it necessary to download it into our linux box or you need to configure it only as it is already installed into BTS from ipaccess company . Thanks, Omar Atia -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Hasse Sent: Wednesday, January 19, 2011 12:14 PM To: [email protected] Subject: Re: How to run openbsc on nanoBTS On 19.01.2011 06:16, Ravi Shankar wrote: > Dear sir Hi Ravi > > I am new to openbsc.I have two NanoBTS(165cu).I'm facing some > difficulty which I'm summarizing below > I'm using Ubuntu10.04 > 1) Can we proceed with one nanobts.? Yes, in fact i would recommend to start with one and if you get familar with openbsc you can add more bts. > 2)I've configured bts ip,unit id, oml ip of one bts.But not able to > get the firmware. Check out ipaccess-config util from the openbts source. You can download the firmware out of the bts you have configured. > How to get it and configure for NanoBTS?? nanoBTS is a different project and based on the USRP. checkout openbts.org to get further informations. > > 3)how to run openbsc ?? http://openbsc.osmocom.org/trac/wiki/BscHack > > Please suggest the procedure to run the openbsc. > > Thanks mfg derPeter
