Hi Andreas, thousand times thanks for the correct hint. Its indeed crystal clear now.
I have tried the git clone from git://git.osmocom.org/openbsc.git but noticed there is still misdn requirement and also no sip support. Then found from the maillist that i should clone git://git.osmocom.eu/openbsc.git <git://git.osmocom.org/openbsc.git> instead of .org which shows sip interfaces on the source. How ever there is no configure file on this source. Am i still checking out from the wrong git ? Once again highly appreciate some light on the final bit. Thanks Nik On Mon, Mar 5, 2012 at 7:44 AM, jolly <[email protected]> wrote: > > Do I have to have mISDN for LCR even im not going to use any isdn > > interface ? Im trying to connect the NITB to LCR and LCR to asterisk > > all on ip. > > > > Thanks for any help. > > > > Rgds > > Nik > hi nik, > > you don't need misdn to use lcr with sip and gsm anymore. also you don't > need any patch. the lcr and openbsc compile out of the box supporting > each other. the howto is a bit outdated. > > try to compile the lcr from the git. don't use chan_lcr, since it still > works with isdn only. you need to setup a sip interface in interface.conf: > > [sip] > sip <local ip> <remote ip>[:<port>] > sip 10.0.0.12 10.0.0.34 > earlyb no > tones no > > use asterisk machine for remote ip. if you have asterisk on the same > machine, change the sip port of asterisk and use "remoteip:port". > > regards, > > andreas > > >
