On Wed, Sep 19, 2012 at 11:48 AM, Peter Stuge <[email protected]> wrote:
> ☎ wrote: > > I have similar setup although in my case it doesn't work at all. > .. > > /etc/osmo_sgsn.cfg: > .. > > ns > .. > > encapsulation udp local-ip 192.168.10.53 > > encapsulation udp local-port 23000 > > > /etc/openbsc.cfg: > .. > > bts 0 > .. > > gprs nsvc 0 local udp port 23000 > > gprs nsvc 0 remote udp port 23000 > > gprs nsvc 0 remote ip 192.168.10.53 > > I don't think both processes can use the same port; move one of them > and configure the other accordingly. > > > //Peter > Hmm... They are both set to the same port in my openbsc.cfg (which appears to be working). The main GPRS page ( http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS) has them both the same when discussing the OpenBSC configuration. Should they be different? Could my version be working because I have aliased some IP addresses on my system? I don't want to modify a working configuration to find out, but if making them different is a good plan, I would want to explore that option. Thanks, John
