Hi List, (sorry for the flood). Any news about this error ? I'm planning to debug this error this weekend. But, I'm not familiar with the code and would appreciate any suggestion of where to start.
Best Regards, On Mon, Aug 26, 2013 at 2:16 PM, Maicon Kist <[email protected]>wrote: > Hi Alexander, > > attached is the capture realized. I started the capture and realized two > USSD calls. > If you need something, just ask. > > > Beset Regards, > > > On Mon, Aug 26, 2013 at 7:51 AM, Maicon Kist <[email protected]>wrote: > >> Hi Alexander, >> >> I didn't even notice that the BTS restarts (it wasn't me). >> >> I will send the capture as soon as possible. >> >> Thank for all help. >> >> Best Regards, >> >> >> >> On Sun, Aug 25, 2013 at 4:50 AM, Alexander Chemeris < >> [email protected]> wrote: >> >>> Maicon, >>> >>> On Sun, Aug 25, 2013 at 12:53 AM, Maicon Kist <[email protected]> >>> wrote: >>> > I think that line 10 is a log of the USSD call I made. >>> >>> And after that your BTS restarts for some reason. Is that because you >>> manually restart it? >>> >>> > Hope it helps. If you need more information, just ask. If you need, I >>> can >>> > use other configurations or command options. >>> >>> Could you enable GSMTAP in OsmoBTS by adding "-i 127.0.0.1" parameter >>> to osmobts-trx, capture traffic on the 4729 UDP port with >>> Wireshark/tshark and send the capture here? >>> >>> It would be also helpful if you capture A-bis interface at the same >>> capture (TCP port 3002/3003). >>> >>> PS List of the various TCP/UDP ports, used by Osmocom is available here: >>> http://openbsc.osmocom.org/trac/wiki/PortNumbers >>> >>> -- >>> Regards, >>> Alexander Chemeris. >>> CEO, Fairwaves LLC / ООО УмРадио >>> http://fairwaves.ru >>> >> >> >
