> maybe try this: > use a gamma of 0. (this means that the maximum power of your phone is not
This I already am using, with only partial success, reaching about 10% coverage, compared to voice. > reduced.) use an alpha of 0. (this means no reduction depending on the With the alpha I did not yet play very much, has to be tested this evening :) > downlink RSSI.) also be sure to set MS_TXPWR_MAX_CCH to 33dbm, so the > maximum allowed output power of the mobile is 2w, if supported. (at > openbsc the parameter is "ms max power 33") My license allows only 100mW :) Anyway, this leads to jamming the receiver when nearby subscribers drive the AGC (?) into limiting the signal, and not recovering fast enough to decode the next (weaker) timeslot. > best regards, > > andreas Ralph.
