Hi there! I just got a nanobts, this if my first time using openBSC.
Here is some info:
System:
gsm@debian:~/osmo_src/bin$ uname -a
Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
x86_64 GNU/Linux
SETTING IP's:
/gsm@debian:~/osmo_src/bin$ ./ipaccess-config -o 10.1.121.1
10.1.121.151//
//ipaccess-config (C) 2009-2010 by Harald Welte and others//
//This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY/
/Trying to connect to ip.access BTS ...//
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=SITE-MANAGER(00)
INST=(ff,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=BTS(01)
INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381
OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked //
//OML link established using TRX 0//
//setting primary OML link IP to '10.1.121.1'//
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,00) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,01) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,02) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,03) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,04) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,05) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,06) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03)
INST=(00,00,07) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=RADIO-CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSE(f0)
INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-CELL(f1)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSVC(f2)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSVC(f2)
INST=(00,01,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07)
ADM=Locked //
//<0005> ../../../src/libbsc/abis_nm.c:2599
OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xf0): SET
NVATTR ACK//
//Set the NV Attributes.//
//gsm@debian:~/osmo_src/bin$ /
FINDING BTS:
/gsm@debian:~/osmo_src/bin$ sudo ./abisip-find enp0s3//
//abisip-find (C) 2009 by Harald Welte//
//This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY/
/Trying to find ip.access BTS by broadcast UDP...//
//MAC_Address='00:02:95:00:41:2a' IP_Address='10.1.121.151'
Unit_ID='20800/0/0' Location_1='' Location_2='BTS_NBT131G'
Equipment_Version='140_029_59' Software_Version='120a002_v200b24d0'
Unit_Name='nbts-00-02-95-00-41-2A' Serial_Number='00073914' /
CONFIG:
!
! OpenBSC configuration saved from vty
! !
password foo
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
network
network country code 334
mobile network code 020
short name AlgoOpenBSC
long name OpenBSC
auth policy accept-all
location updating reject cause 13
encryption a5 0
neci 1
rrlp mode none
mm info 1
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
timer t3101 10
timer t3103 0
timer t3105 0
timer t3107 0
timer t3109 4
timer t3111 0
timer t3113 60
timer t3115 0
timer t3117 0
timer t3119 0
timer t3141 0
bts 0
type nanobts
band DCS1800
cell_identity 0
location_area_code 1
training_sequence_code 7
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
channel allocator ascending
rach tx integer 9
rach max transmission 7
ip.access unit_id 20800 0
oml ip.access stream_id 255 line 0
gprs mode none
trx 0
rf_locked 0
arfcn 514
nominal power 23
max_power_red 20
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
timeslot 1
phys_chan_config SDCCH8
timeslot 2
phys_chan_config TCH/F
timeslot 3
phys_chan_config TCH/F
timeslot 4
phys_chan_config TCH/F
timeslot 5
phys_chan_config TCH/F
timeslot 6
phys_chan_config TCH/F
timeslot 7
phys_chan_config TCH/F
OUTPUT:
/gsm@debian:~/osmo_src/bin$ ./osmo-nitb//
//<001e> ../../../src/vty/telnet_interface.c:102 telnet at 127.0.0.1
4242//
//<0005> ../../../src/libbsc/bsc_init.c:465 //
//WARNING: You are running an 'accept-all' network on a BTS that is
not barred. This configuration is likely to interfere with
production GSM networks and should only be used in a RF shielded
environment such as a faraday cage!//
//
//<0020> ../../src/input/ipaccess.c:846 enabling ipaccess BSC mode
on 0.0.0.0 with OML 3002 and RSL 3003 TCP ports//
//<0017> ../../../src/libmsc/smpp_smsc.c:1001 SMPP at 0.0.0.0 2775//
//<0025> ../../../src/ctrl/control_if.c:788 CTRL at 127.0.0.1 4249//
//DB: Database initialized.//
//DB: Database prepared.//
//<0020> ../../src/input/ipa.c:263 accept()ed new link from
10.1.121.151 to port 3002//
//Getting attributes from BTS0 type nanobts is not supported.//
//Getting attributes from BTS0 type nanobts is not supported.//
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0ULM:ULM_FIFODRV:fifodrv.c#1864 (6082). //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0TxQueue
full. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
ra=080036ae sp=40017a38. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[400179e8] |4000b518|00000000|08000af0|08000998|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[400179f8] |20000093|080007e8|00000000|00000093|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a08] |40017b58|40003c64|00000000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a18] |80380000|00000000|40003c64|08002d8b|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a28] |00000000|40017a38|40004a7c|40017a90|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a38] |00000000|40017ab0|080595b8|00000002|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a48] |40006fbc|0800762f|40017ac4|08059a78|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a58] |0000000d|40007098|400047d8|40017a88|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a68] |00000001|00000000|080417f8|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a78] |0800c321|40017b58|08007c45|40000093|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0ULS:ULS_FIFODRV:fifodrv.c#1864 (7540). //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0TxQueue
full. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
ra=08011da8 sp=4000c7c8. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c778] |4000c784|08000af0|080012d8|000000b3|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c788] |c0000000|00001950|00000050|00000040|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c798] |00000000|00000001|40000093|400032c0|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7a8] |00000000|00000000|80380000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7b8] |60000093|4000c7c8|08011da9|08011da8|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7c8] |40003b10|4000c7e0|400000d3|08000c14|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7d8] |0800a900|55555555|40003b40|4000d288|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7e8] |50036300|400049c4|00000000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7f8] |00000000|00000000|00000000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c808] |00000000|00000000|08011d8b|4000c77c|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0DLP:L2_BCH:l2_bch.c#1065 (2586). //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0BCHbcchSItypeValid( prim_p->infoType ). //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
ra=0801446c sp=4000d724. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6d4] |4000d6e0|08000af0|080012d8|000000b3|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6e4] |c0000000|00001950|00000050|00000040|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6f4] |00000000|00000001|40000093|40003bb8|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d704] |00000000|00000000|80380000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d714] |60000093|4000d724|0801446d|0801446c|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d724] |400049d8|4000d73c|400000d3|08000c14|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d734] |0800a900|55555555|40004a08|4000e1e4|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d744] |50036300|4000588c|00000000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d754] |00000000|00000000|00000000|00000000|. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d764] |00000000|00000000|0801444f|4000d6d8|. //
//<0020> ../../src/input/ipa.c:263 accept()ed new link from
10.1.121.151 to port 3003//
//<0004> ../../../src/libbsc/bsc_init.c:311 bootstrapping RSL for
BTS/TRX (0/0) on ARFCN 514 using MCC=334 MNC=20 LAC=1 CID=0 BSIC=63//
//BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Process stopped, Additional
Text=lme_manage_fsm_actions.c:636IPC Ping timeout - DLP FAILED. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer specific
values: Software warning, Additional
Text=38454:WARN:OAM_RES:res_trx_status.c#209:TRX is not responding -
reinitialising . //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer specific
values: Software warning, Additional Text=FSM Unhandled Event
class=Baseband Transceiver inst=0 ev="DISABLED RSP" st=ini. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer specific
values: Software warning, Additional Text=FSM Unhandled Event
class=Radio Carrier inst=0 ev="DISABLED RSP" st=initial//
//. //
//BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer specific
values: Software warning, Additional Text=FSM Unhandled Event
class=Baseband Transceiver inst=0 ev="CLEAR I REQ" st=init. //
//<0020> ../../src/input/ipaccess.c:241 Sign link vanished, dead
socket//
//<0020> ../../src/input/ipaccess.c:69 Forcing socket shutdown with
no signal link set/
