Hi Gullik, On Mon, Jan 21, 2019 at 01:05:09PM +0100, Gullik Webjorn wrote: > What is the best practice to enable / disable a single bts / trx in a multi > trx configuration?
Just stop/disconnect it? > Just stopping it, phones settle after some time, but I get a lot of timeouts > in syslog. what kind of "timeouts in syslog" ? > So, for service / reconfig purposes, how do I disable a single (remote ) bts > from the BSC side? ( without making a temporary config file and restarting ? ) you can make any change to the configuration at runtime and you don't need to restart the BSC. Option 1: ---- enable configure terminal network bts 0 ip.access unit_id 55555 end drop bts connection 0 oml ---- assuming that "55555" is not a valid unit-id, the BTS will be disconnected and not permitted to reconnect due to unknown unit-id this is a bit of a hack. The better solution is: ---- enable configure terminal network bts 0 trx 0 rf_locked 1 end drop bts connection 0 oml ---- And then if you want to re-enable it, do the same with 'rf_locked 0'. -- - Harald Welte <[email protected]> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)
