Hello, thanks for the reply. What i mean about disconnecting is to make camped devices as "un-camped" from my setup or bts. turning the phone in flight mode is the correct example but is it possible to un-camped a specific device from thw bts side or from my setup?
On Thu, Jul 22, 2021, 7:21 AM Neels Hofmeyr <[email protected]> wrote: > On Thu, Jul 22, 2021 at 04:20:55AM +0800, Henry Caga wrote: > > Hi, > > > > I would like to know if it is possible to disconnect a connected device > to > > my osmo-bsc system? > > > > After running my osmo-bsc setup and my test phone is connected to my usrp > > via 2g, is it possible to send a vty command or what are the steps to > make > > the connected device to detach to my bts? > > > > Thank you so much. > > > > Hnjojo > > On osmo-bsc level on a live channel you could try to release the lchan the > subscriber is using with this VTY command: > > enable > bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> deactivate fr > > Of course the subscriber is then still attached to the network on MSC > level, > but the active connection should be interrupted. > > The question is what exactly do you mean by "disconnect". > > you can also put your phone in flight mode to disconnect it... >
