Thank you so much. I’m going to give this a try. <end transmission>
> On Oct 26, 2021, at 15:29, Alexander 'lynxis' Couzens <[email protected]> wrote: > > Hi Paul, > > depending on your firmware your device will either use bmis or tr069 as > configuration. > > If you have a tr069 firmware you can use this "simple" tr069 > https://git.sysmocom.de/sysmocom/femto-acs to configure and connect to > the osmo-hnbgw. > Over the provisioning webui you can set the tr069 server. > > So you would need to setup osmo-hnbgw, osmo-msc, osmo-mgw, osmo-sgsn, > osmo-ggsn, osmo-hlr, osmo-stp. depending on your voice setup you would > also need osmo-sip-connector to a pbx (e.g. asterisk, freeswitch, ..). > > You should read > https://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_Network_In_The_Box > for further information. > > Best, > lynxis > -- > Alexander Couzens > > mail: [email protected] > jabber: [email protected] > gpg: 390D CF78 8BF9 AA50 4F8F F1E2 C29E 9DA6 A0DF 8604
