Hi, I am using an ibm t43p and have realised that the fans are spinning *all* the time. When I was using the same laptop with a debian flavour I scarcely could hear them spinning.
In dmesg I see cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612112b0600112b cpu0: Enhanced SpeedStep 2267 MHz (1388 mV): speeds: 2267, 800 MHz This "unknwon" must be the problem... ?? in any case, I have tried playing around with sysctl this way tuffstein| sysctl -a hw.cpuspeed hw.cpuspeed=2262 tuffstein| sudo sysctl -w hw.setperf=50 hw.setperf: 100 -> 50 tuffstein| sysctl -a hw.cpuspeed hw.cpuspeed=2267 tuffstein| sudo sysctl -w hw.setperf=0 hw.setperf: 50 -> 0 tuffstein| sysctl -a hw.cpuspeed hw.cpuspeed=800 But this doesn't help at all... the fans spin still all the time... zzzzzzzzzzzzzhhhhhhh On the other hand, cpu seems to be missing http://www.openbsd.org/cgi-bin/man.cgi?query=cpu&arch=i386 whereis cpu yields nothing and pkg_add "Can't resolve cpu" I didn't find it either in ports Can somebody help a zzzzzzzh'ed newbie? How do I reduce, if not totally eliminate this noise? Before you ask, yes, I have googled around but I must be very bad at it because I found nothing but this http://www.cse.unsw.edu.au/~dons/x31.html and he's doing the same than I am If you're curious, here you are my dmesg OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 2.26GHz ("GenuineIntel" 686-class) 2.27 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612112b0600112b cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2267 MHz (1388 mV): speeds: 2267, 800 MHz real mem = 2145873920 (2095580K) avail mem = 1949347840 (1903660K) using 4256 buffers containing 107397120 bytes (104880K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(e5) BIOS, date 05/18/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries) bios0: IBM 2668Q1G apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 98% apm0: AC on, battery charge high apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #12 is the last bus bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI FireGL V3200" rev 0x80 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:16:41:58:cd:b0 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci4 at ppb3 bus 11 cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11 iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:16:6f:a4:62:d7 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTS721080G9AT00> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-822S, 1.61> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask effd netmask effd ttymask ffff pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support ugen0 at uhub2 port 2 ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz _______________________________________________ Openbsd-newbies mailing list [email protected] http://mailman.theapt.org/listinfo/openbsd-newbies
