Hi,
I am using openbsd 4.1 on a laptop FJS and I've noticed that the fans are
spinning basically all the time. I would of course prefere a quit laptop but I
guess this is related to acpi, even if there's been a quite impressive
breakthrough recently in obsd.
It's not that I cannot bear it, mine is rather a more novice question regarding
hardware... "Is it bad for the laptop? Does it mean the the cpu is hotter in
obsd?" I cannot tell because apm is not working. But acpi shows the five
different steps for SpeedStep...
I guess that all the time spinning fans are better than silent fans and a melt
cpu... but I'm just asking.
Cheers,
Pau
Here you are my dmesg:
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class) 1.11
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063809024 (1038876K)
avail mem = 963268608 (940692K)
using 4278 buffers containing 53313536 bytes (52064K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 09/01/04, BIOS32 rev. 0 @ 0xfd720, SMBIOS
rev. 2.3 @ 0xe8100 (43 entries)
bios0: FUJITSU SIEMENS 0000000000
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd200! 0xdc000/0x4000!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1100 MHz (940 mV): speeds: 1100, 1000, 900, 800, 600
MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xd8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
cbb0 at pci1 dev 10 function 0 "Ricoh 5C476 CardBus" rev 0xab: irq 11
cbb1 at pci1 dev 10 function 1 "Ricoh 5C476 CardBus" rev 0xab: irq 11
"Ricoh 5C552 Firewire" rev 0x03 at pci1 dev 10 function 2 not configured
vendor "Ricoh", unknown product 0x0576 (class system subclass miscellaneous,
rev 0x01) at pci1 dev 10 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x00 at pci1 dev 10 function 4 not configured
rl0 at pci1 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0b:5d:8c:e2:0d
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci1 dev 13 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
address 00:0e:35:83:08:f2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2080AH>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4
AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48009 Hz, will use 48000 Hz
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
