After googling further, I found that someone was able to get their
configuration to work by disabling the USB HUB. So, I booted "bsd.rd
-c"
UKC> disable uhub
UKC> verbose
UKC> exit
The system boots and gets past the webcam, only to hang at this line:
rd0: fixed, 3800 blocks
Nothing occurs past this point. The dmesg says that there is plenty
of RAM available, so I don't know what could be the problem at this
point. I can install OBSD on the box at work, and do it that way, but
that is a real kludgy way of doing it...
Any ideas?
On 10/28/07, Bryan <[EMAIL PROTECTED]> wrote:
> We bought a new Inspiron 1520, and my wife insisted that it have a
> webcam in it for her to Skype on it.
>
> At work, I am able to use OBSD on an SATA drive at work, so I brought that
> home, and popped it in to the new laptop and it works like a charm.
>
> The problem comes when I attempt to upgrade to the latest snapshot.
> bsd.rd boots all the way to the part where the webcam comes up, then
> it hangs. It does not continue on.
>
> I will say that when I boot the hardrive normally, it mounts the
> webcam as "ugen0". I attempted to disable ugen0 in the UKC> before
> starting bsd.rd, but this did not work. This is what comes up when
> booting bsd.rd for the webcam...
>
> "OnmiVision Technologies, Inc. -2640-07.07.20.3 Laptop Integrated Webcam"
> , class 239/2, rev 2.00/1.00, addr 3, uhub1 port 6 not configured"
>
>
> Then nothing...
>
> I looked in the BIOS, but there is no mention of the webcam, and no
> way to disable that ( that I can see anyway...)
>
> Any ideas on what I can do to get bsd.rd to boot and bypass the
> webcam??? I am forced to use snapshots because attempting to use 4.2
> ends up not seeing any of my interfaces needed to get on the
> network...
>
> Below is the dmesg for the snapshot from Oct 2. (I'd like to figure
> out a why, short of physically disconnecting the webcam from the mobo)
>
> Is there a "time-out" function when attempting to ascertain what
> something is? Will OBSD give up after a while and continue on,
> leaving that item in limbo?
>
> Many thanks...
>
> Bryan Brake
> -----------------------------------------------------------------------------------------------------------------------------------
> dmesg.boot:
>
> OpenBSD 4.2-current (GENERIC.MP) #263: Tue Oct 2 13:56:34 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
> 686-class) 1.50 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
> PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,
> DS-CPL,EST,TM2,CX16,xTPR
> real mem = 1063424000 (1014MB)
> avail mem = 1020420096 (973MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/16/07, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.4 @ 0xf7180 (45 entries)
> bios0: vendor Dell Inc. version "A03" date 08/16/2007
> bios0: Dell Inc. Inspiron 1520
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaa00/240 (13 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
> 0x00)
> pcibios0: PCI bus #13 is the last bus
> bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 166 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
> 686-class) 1.50 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
> PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,
> DS-CPL,EST,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 3 (PCIE)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 11 (RP01)
> acpiprt3 at acpi0: bus 12 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus 13 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus 0 (PCI0)
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpiac at acpi0 not configured
> acpibat at acpi0 not configured
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x0613092b0600092b
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1500 MHz (1388 mV): speeds: 1500, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x0c
> vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x0c: aperture
> at 0xe0000000, size 0x8000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82965GM Video" rev 0x0c at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2
> int 20 (irq 10)
> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2
> int 21 (irq 9)
> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2
> int 22 (irq 7)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: "Intel EHCI root hub", rev 2.00/1.00, addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02:
> apic 2 int 21 (irq 9)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Sigmatel/0x76a0 (rev. 2.4), HDA version 1.0
> azalia0: codec: Conexant/0x2c06 (rev. 0.0), HDA version 1.0
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02
> pci1 at ppb0 bus 11
> ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02
> pci2 at ppb1 bus 12
> bwi0 at pci2 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 2 int
> 17 (irq 10), address 00:1d:60:40:27:a0
> ppb2 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02
> pci3 at ppb2 bus 13
> uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2
> int 20 (irq 10)
> uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2
> int 21 (irq 9)
> uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2
> int 22 (irq 7)
> ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2
> int 20 (irq 10)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1: "Intel EHCI root hub", rev 2.00/1.00, addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
> pci4 at ppb3 bus 3
> bce0 at pci4 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 2
> int 17 (irq 10), address 00:1c:23:aa:63:5d
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> "Ricoh 5C832 Firewire" rev 0x05 at pci4 dev 1 function 0 not configured
> sdhc0 at pci4 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
> int 18 (irq 4)
> sdmmc0 at sdhc0
> "Ricoh 5C843" rev 0x12 at pci4 dev 1 function 2 not configured
> "Ricoh 5C592 Memory Stick" rev 0x12 at pci4 dev 1 function 3 not configured
> "Ricoh 5C852 xD" rev 0x12 at pci4 dev 1 function 4 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L632H, D200> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 31 function 2 vendor "Intel", unknown product
> 0x2828 rev 0x02: DMA (unsupported), channel 0 configured to
> native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 2 int 17 (irq 10) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD1200BEVS-00UST0>
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> pciide1: channel 1 ignored (not responding; disabled or no drives?)
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
> 2 int 17 (irq 10)
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2: "Intel UHCI root hub", rev 1.00/1.00, addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3: "Intel UHCI root hub", rev 1.00/1.00, addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4: "Intel UHCI root hub", rev 1.00/1.00, addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5: "Intel UHCI root hub", rev 1.00/1.00, addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6: "Intel UHCI root hub", rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> zyd0 at uhub1 port 4 configuration 1 interface 0
> zyd0: "ZyDAS USB2.0 WLAN", rev 2.00/48.02, addr 2
> ugen0 at uhub1 port 6
> ugen0: "OmniVision Technologies, Inc. -2640-07.07.20.3 Laptop
> Integrated Webcam", rev 2.00/1.00, addr 3
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a swap on wd0b dump on wd0b
> zyd0: HMAC ZD1211, FW 46.05, RF AL2230, PA 0, address 00:02:72:52:4a:1f
>
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
