I just installed 4.7 on my laptop, but as soon as openbsd boots, the fan comes
on and stays on.
Temp is shown as 67C with just console log in.
I booted linux with kde and the temp was 42C while running kde.
I tried disabling acpi, but that didn't help, so enabled it.
Here is my dmesg from /var/run:
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Sempron(tm) Processor 3100+ ("AuthenticAMD" 686-class, 256KB
L2 cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 468217856 (446MB)
avail mem = 444960768 (424MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/20/06, BIOS32 rev. 0 @ 0xfd5f0, SMBIOS
rev. 2.31 @ 0x1befb000 (24 entries)
bios0: vendor Acer version "3A32" date 02/20/06
bios0: Acer, inc. Aspire 3000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT
acpi0: wakeup devices PCI0(S5) LAN_(S5) MODM(S3) USB0(S3) USB1(S3) USB2(S3)
USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, PSS
acpitz0 at acpi0: critical temperature 97 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x8000!
cpu0: PowerNow! K8 20288 MHz: speeds: 1800 1600 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 760 PCI" rev 0x03
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 760: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, CDRW/DVD SCB5265, TX07> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SiS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 1 int 18 (irq
5), SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 20 (irq
9), version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 21 (irq
11), version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: apic 1 int 23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: apic 1 int 19
(irq 3), address 00:16:36:3c:14:4a
rlphy0 at sis0 phy 13: RTL8201L 10/100 PHY, rev. 1
cbb0 at pci0 dev 6 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 19 (irq
255), CardBus support disabled
bwi0 at pci0 dev 11 function 0 "Broadcom BCM4318" rev 0x02: apic 1 int 17 (irq
4), address 00:16:ce:49:a8:e1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "Sunplus Innovation
Technology. USB to Serial-ATA bridge" rev 2.00/1.0f addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <WDC WD20, 00BEVS-00UST0, > SCSI2 0/direct fixed
sd0: 190782MB, 512 bytes/sec, 390721968 sec total
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
