Hi again!
There is no error message at all. Print screen looks like this:
===============
porting the RBAC-configuration ... Ok.
Exporting valid CA_CERTIFICATE ...
c49786f83f9d1e6f0c18ddd83787633d.pem
Creating Archive ...
Load required variables ...
==============
It looks like the exporting process stops in the middle. Permisoons are
already changed, so it must be something else. The hole thing worked fine in
R5.
Any idea?
Thanks and best regards,
Ales Keber
[EMAIL PROTECTED]
----- Original Message -----
From: "Michael Bell" <[EMAIL PROTECTED]>
To: "Ales Keber" <[EMAIL PROTECTED]>
Sent: Monday, October 07, 2002 9:06 AM
Subject: Re: [Openca-Users] OpenCA 0.9.1 RC6 Import/export problem
> Ales Keber wrote:
> > Hello Michael,
> >
> >
> > after that fix I have a new problem. I can't export configuratio of CA
cert
> > on a floppy. The process stops at "Crating Archive ..."
>
> I think errorcode 512?
> Usually this is a problem with the accessrights. If you use a Unixbox
> then /dev/fd0 is normally owned by the last user on console. The
> permissions are 644 or 600. The webserver cannot write to /dev/fd0. So
> please change the permissions.
>
> Michael
>
> --
> -------------------------------------------------------------------
> Michael Bell Email (private): [EMAIL PROTECTED]
> Rechenzentrum - Datacenter Email: [EMAIL PROTECTED]
> Humboldt-University of Berlin Tel.: +49 (0)30-2093 2482
> Unter den Linden 6 Fax: +49 (0)30-2093 2959
> 10099 Berlin
> Germany http://www.openca.org
>
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Openca-Users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/openca-users
