Valeria On Fri, 2004-05-14 at 11:42, open_group wrote: > I think I've got the correct values in the config files (ca_node.conf, > ra.node.conf, etc.)... > I've chosen to write all data into .tar file instead of fd0, so I've > changed the config files according to the appropriate parameters. > > Which different values in config files, could I check? >
I suppose you just need to check that the RA and CA are looking at the same data exchange file. After you have exported it can you check that there is data in the file (using tar -tvf *****.tar). Then when you import it you "should" see the data coming in as long as the CA is looking at the correct file. Have you done the procedure the other way round ? I.e. have you exported "ALL" from the CA so that the RA has the correct configuration ? If so then this shows that the exchange files are correct and the problem is somewhere else. Chris... ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Openca-Users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/openca-users
