No that didn't fix the problem. Apache logs complains "You don't have
permission to access /cgi-bin/ca/ca on this server," which is odd since I
have httpd-user=apache and openca-group=apache.
Actually my problem is that installing the CA and RA without using the
default dataexchange configuration will failed for me, it would not generate
the openca_start program for me. First time installing the RA for the
"dataexchange configuration" section I've uncommented #2. the node acts as
RA only, and when I ran "./configure_etc.sh" it failed, with the following
error:
[EMAIL PROTECTED] etc]# ./configure_etc.sh
=================================================================
fixing directory: /usr/local/openra/openca/etc
=================================================================
-------------begin file-----------------
template: ./backup.xml.template
target: ./backup.xml
status: To be updated
Error:
Message:
--------------end file------------------
-------------begin file-----------------
template: ./database/DBI.conf.template
target: ./database/DBI.conf
status: To be updated
Error:
Message:
--------------end file------------------
-------------begin file-----------------
template: ./rbac/acl.xml.template
target: ./rbac/acl.xml
status: To be updated
Error:
Message:
--------------end file------------------
-------------begin file-----------------
template: ./openca_start.template
target: ./openca_start
status: To be updated
Error:
Message:
Only when I go back and edit the config.xml file to use the default
dataexchange configuration then it compiled. Same problem for the CA as
well. What is wrong here? I want to install a CA node and RA node only and
NOT use the default.
I've noticed that there is a openca-tools source package, do I need to
install this first to have a CA and RA working? If so, when I configure can
I use the default ./configure then make install?
My configure options for RA below:
PREFIX=/usr/local/openra
make clean 2> /dev/null
make distclean 2> /dev/null
./configure \
--prefix=${PREFIX} \
--with-node-prefix=ra-node \
--with-openca-prefix=${PREFIX}/openca \
--with-etc-prefix=${PREFIX}/openca/etc \
--with-httpd-fs-prefix=${PREFIX}/httpd \
--with-module-prefix=${PREFIX}/modules \
--with-engine=no \
--with-web-host="s01.prog.devbms.com" \
--with-ca-organization="XYX" \
--with-ca-country=US \
--with-ca-locality="Palo Alto, CA" \
--enable-db \
--enable-ocspd \
--enable-scep \
--enable-dbi \
--enable-rbac \
--with-httpd-user=apache \
--with-httpd-group=apache \
--with-openca-user=root \
--with-openca-group=apache \
--with-hierarchy-level=ra
And attached is my RA config.xml file for your reference.
Thanks,
Janet
On 4/4/07, Matthias Alsmann <[EMAIL PROTECTED]> wrote:
Hi Janet,
> When I checked the httpd error log file I get:
>
> [Tue Apr 03 06:04:42 2007] [error] [client 192.168.200.111 ]
(13)Permission
> denied: exec of '/usr/local/openca/httpd/cgi-bin/ca/ca'
> failed
>
> Although, I have httpd running as root so not sure why permission
denied.
>
You have different paths in your httpd.conf
The script alias contains 'openra' but the directory stanza contains
'openca' and I think this is your problem.
Kind regards, Matthias
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Openca-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openca-users
<?xml version="1.0" encoding="UTF-8"?>
<openca>
<software_config>
<!--
########################################################
USAGE WARNING
########################################################
If yo change this file then you must change all files in
etc which has the suffix .template. Please do this with
the script openca-configure.
Example:
template: servers/ca.conf.template
openca-configure config.xml servers/ca.conf.template servers/ca.conf
If you don't do this then you have an inconsistent
OpenCA installation. So this warning is serious.
You can update all templates with a simple bash script.
configure_etc.sh is such a script and demonstrates the
usage of openca-configure.
2003-Mar-12, Michael Bell <[EMAIL PROTECTED]>
-->
<prefix>@</prefix>
<suffix>@</suffix>
<!-- =============== -->
<!-- general options -->
<!-- =============== -->
<option>
<name>default_language</name>
<value>C</value>
</option>
<option>
<name>default_charset</name>
<value>UTF-8</value>
</option>
<option>
<!--
cert_chars says if you want utf8 or latin1
strings to be allowed in the fields of reqs
and certs. Can have values "UTF8" or "LATIN1".
If left empty or absent altogether, defaults to
LATIN1 strings.
-->
<name>cert_chars</name>
<value>LATIN1</value>
</option>
<option>
<!--
Once cert_chars is UTF8 you may use
strings in national languages here.
-->
<name>ca_organization</name>
<value>XYZ</value>
</option>
<option>
<!--
Once cert_chars is UTF8 you may use
strings in national languages here.
-->
<name>ca_locality</name>
<value>Palo Alto, CA/value>
</option>
<option>
<!--
please enter the ISO country code here
DE, IT, PL, UK, US ...
this country code is ALWAYS two characters long
-->
<name>ca_country</name>
<value>US</value>
</option>
<option>
<name>sendmail</name>
<value>/usr/lib/sendmail -n -t </value>
</option>
<option>
<name>send_mail_automatic</name>
<value>no</value>
</option>
<option>
<name>service_mail_account</name>
<value></value>
</option>
<option>
<name>policy_link</name>
<value>https://s01.prog.devbms.com/pub/policy.html</value>
</option>
<!-- ======================== -->
<!-- web server configuration -->
<!-- ======================== -->
<option>
<name>httpd_protocol</name>
<value>https</value>
</option>
<option>
<name>httpd_host</name>
<value>s01.prog.devbms.com</value>
</option>
<option>
<!-- please include the colon if you specify a port -->
<!-- please remember this is dependend from httpd_protocol -->
<name>httpd_port</name>
<value>:443</value>
</option>
<option>
<name>menu_logo_left</name>
<value>
<!-- Here you can put references to the logo, you can use
any html reference you want but please keep in mind that:
no <> are allowed, use instead < and > rispectively.
example:
<img src="https://xyz.org/mylogo.jpg"; alt="XYZ Logo"/>
-->
</value>
</option>
<option>
<name>menu_logo_right</name>
<a href="__HTDOCS_PREFIX__/thanks.html">
<img src="__HTDOCS_PREFIX__/images/openca-logo.png" alt="OpenCA Logo"/>
</a>
<value></value>
</option>
<option>
<!--
You can add more CDPs here. Please enter one CDP per line.
This is the content of an OpenSSL configuration section.
Example:
URI.1=http://cdp1.xyz.de/pub/crl/cacrl.crl
URI.2=ldap://cdp2.xyz.de/cn=CA,ou=Trustcenter,o=XYZ,c=DE
URI.3=http://cdp2.xyz.de/pub/crl/cacrl.crl
URI.4=ldap://cdp1.xyz.de/cn=CA,ou=Trustcenter,o=XYZ,c=DE
-->
<name>CRLDistributionPoints</name>
<value>
URI.1=http://s01.prog.devbms.com/pub/crl/cacrl.crl
</value>
</option>
<option>
<name>NS_CRLDistributionPoint</name>
<value>http://s01.prog.devbms.com/pub/crl/cacrl.crl</value>
</option>
<!-- ========================= -->
<!-- ldap server configuration -->
<!-- ========================= -->
<option>
<name>ldap_host</name>
<value>s01.prog.devbms.com</value>
</option>
<option>
<name>ldap_port</name>
<value>389</value>
</option>
<option>
<name>ldaproot</name>
<value></value>
</option>
<option>
<name>ldaprootpwd</name>
<value></value>
</option>
<option>
<name>useLDAP</name>
<value>no</value>
</option>
<option>
<name>update_ldap_automatic</name>
<value>no</value>
</option>
<!-- ====================== -->
<!-- database configuration -->
<!-- ====================== -->
<option>
<name>dbmodule</name>
<!-- you can use DB or DBI -->
<value>DBI</value>
</option>
<option>
<name>db_type</name>
<value>mysql</value>
</option>
<option>
<name>db_name</name>
<value>openca</value>
</option>
<option>
<name>db_host</name>
<value>openca</value>
</option>
<option>
<name>db_port</name>
<value>5432</value>
</option>
<option>
<name>db_user</name>
<value>openca</value>
</option>
<option>
<name>db_passwd</name>
<value>openca</value>
</option>
<option>
<name>db_namespace</name>
<!--
a namespace is prefix in front of every table
Example: table user1
==>
select * from user1.certificate;
This is not required for MySQL, PostgreSQL and IBM DB2.
Nevertheless all supported database can use such namespaces
and it is the default behaviour of Oracle. Oracle uses as
namespace usually the name of the database.
-->
<value>openca</value>
</option>
<!-- ==================== -->
<!-- module configuration -->
<!-- ==================== -->
<option>
<name>module_shift</name>
<!-- 8 bits are enough for IDs from 0 to 255 -->
<!-- please remember that 0 is the ID of the CA -->
<value>8</value>
</option>
<option>
<name>ra_module_id</name>
<value>1</value>
</option>
<option>
<name>ldap_module_id</name>
<value>2</value>
</option>
<option>
<name>node_module_id</name>
<value>3</value>
</option>
<option>
<name>pub_module_id</name>
<value>32</value>
</option>
<option>
<name>scep_module_id</name>
<value>33</value>
</option>
<option>
<name>batch_module_id</name>
<value>128</value>
</option>
<!-- =============================== -->
<!-- configuration of relative paths -->
<!-- =============================== -->
<option>
<name>batch_htdocs_url_prefix</name>
<value>/batch</value>
</option>
<option>
<name>batch_cgi_url_prefix</name>
<value>/cgi-bin/batch</value>
</option>
<option>
<name>ca_htdocs_url_prefix</name>
<value>/ca</value>
</option>
<option>
<name>ca_cgi_url_prefix</name>
<value>/cgi-bin/ca</value>
</option>
<option>
<name>node_htdocs_url_prefix</name>
<value>/ra-node</value>
</option>
<option>
<name>node_cgi_url_prefix</name>
<value>/cgi-bin/ra-node</value>
</option>
<option>
<name>ra_htdocs_url_prefix</name>
<value>/ra</value>
</option>
<option>
<name>ra_cgi_url_prefix</name>
<value>/cgi-bin/ra</value>
</option>
<option>
<name>ldap_htdocs_url_prefix</name>
<value>/ldap</value>
</option>
<option>
<name>ldap_cgi_url_prefix</name>
<value>/cgi-bin/ldap</value>
</option>
<option>
<name>pub_htdocs_url_prefix</name>
<value>/pub</value>
</option>
<option>
<name>pub_cgi_url_prefix</name>
<value>/cgi-bin/pub</value>
</option>
<option>
<name>scep_cgi_url_prefix</name>
<value>/cgi-bin/scep</value>
</option>
<!-- =============================== -->
<!-- configuration of absolute paths -->
<!-- =============================== -->
<option>
<name>batch_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/batch</value>
</option>
<option>
<name>batch_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/batch</value>
</option>
<option>
<name>ca_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/ca</value>
</option>
<option>
<name>ca_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/ca</value>
</option>
<option>
<name>node_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/ra-node</value>
</option>
<option>
<name>node_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/ra-node</value>
</option>
<option>
<name>ra_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/ra</value>
</option>
<option>
<name>ra_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/ra</value>
</option>
<option>
<name>ldap_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/ldap</value>
</option>
<option>
<name>ldap_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/ldap</value>
</option>
<option>
<name>pub_htdocs_fs_prefix</name>
<value>/usr/local/openra/httpd/htdocs/pub</value>
</option>
<option>
<name>pub_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/pub</value>
</option>
<option>
<name>scep_cgi_fs_prefix</name>
<value>/usr/local/openra/httpd/cgi-bin/scep</value>
</option>
<!-- ===================== -->
<!-- configuration of SCEP -->
<!-- ===================== -->
<option>
<name>SCEP_RA_CERT</name>
<value></value>
</option>
<option>
<name>SCEP_RA_KEY</name>
<value></value>
</option>
<option>
<name>SCEP_RA_PASSWD</name>
<value></value>
</option>
<!-- ===================== -->
<!-- general configuration -->
<!-- ===================== -->
<option>
<name>USE_LOAS</name>
<value>yes</value>
</option>
<option>
<name>prefix</name>
<value>/usr/local/openra</value>
</option>
<option>
<name>bindir</name>
<value>/usr/local/openra/bin</value>
</option>
<option>
<name>etc_prefix</name>
<value>/usr/local/openra/openca/etc</value>
</option>
<option>
<name>lib_prefix</name>
<value>/usr/local/openra/openca/lib</value>
</option>
<option>
<name>var_prefix</name>
<value>/usr/local/openra/openca/var</value>
</option>
<option>
<name>batch_prefix</name>
<value>batch</value>
</option>
<option>
<name>ca_prefix</name>
<value>ca</value>
</option>
<option>
<name>ldap_prefix</name>
<value>ldap</value>
</option>
<option>
<name>node_prefix</name>
<value>ra-node</value>
</option>
<option>
<name>pub_prefix</name>
<value>pub</value>
</option>
<option>
<name>ra_prefix</name>
<value>ra</value>
</option>
<option>
<name>scep_prefix</name>
<value>scep</value>
</option>
<!-- ========================== -->
<!-- dataexchange configuration -->
<!-- ========================== -->
<!-- there are several templates available today -->
<!-- 0. no dataexchange configure - the default -->
<!-- this makes only sense for an all in one box -->
<!-- it is strongly recommended to use this only for testing -->
<!-- 1. the node acts as CA only -->
<!-- the node exports to one or several RAs only -->
<!-- the node can export to LDAP too -->
<!-- 2. the node acts as RA only -->
<!-- the node exchange data with a CA and public/scep -->
<!-- the node can act as LDAP too -->
<!-- the node can export to LDAP too -->
<!-- 3. the node acts as public/scep only -->
<!-- the node exchange data with a RA -->
<!-- 4. the node acts as LDAP only -->
<!-- the node receives data from CA or RA -->
<!-- 5. the node acts as public/scep and RA -->
<!-- the node echanges data with a CA only -->
<!-- no support for dataexchange with additional LDAP -->
<!-- 6. the node acts as RA and CA -->
<!-- the node exchange data with public/scep -->
<!-- the node can export to LDAP too -->
<!-- -->
<!-- LDAP is only relevant if it is the only protocol on the node -->
<!-- 0. no dataexchange configure - the default -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_crl_states</name>
<value></value>
</option>
<option>
<name>enroll_crr_states</name>
<value></value>
</option>
<option>
<name>enroll_csr_states</name>
<value></value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value></value>
</option>
<option>
<name>receive_csr_states</name>
<value></value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>download_certificate_states</name>
<value></value>
</option>
<option>
<name>download_crl_states</name>
<value></value>
</option>
<option>
<name>download_crr_states</name>
<value></value>
</option>
<option>
<name>download_csr_states</name>
<value></value>
</option>
<option>
<name>download_mail_states</name>
<value></value>
</option>
<option>
<name>upload_crr_states</name>
<value></value>
</option>
<option>
<name>upload_csr_states</name>
<value></value>
</option>
<!--
<!-- 1. the node acts as CA only -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crr_states</name>
<value>ARCHIVED DELETED APPROVED</value>
</option>
<option>
<name>enroll_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>enroll_mail_states</name>
<value>CRINS DEFAULT</value>
</option>
<option>
<name>receive_crr_states</name>
<value>APPROVED</value>
</option>
<option>
<name>receive_csr_states</name>
<value>APPROVED</value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>download_certificate_states</name>
<value></value>
</option>
<option>
<name>download_crl_states</name>
<value></value>
</option>
<option>
<name>download_crr_states</name>
<value></value>
</option>
<option>
<name>download_csr_states</name>
<value></value>
</option>
<option>
<name>download_mail_states</name>
<value></value>
</option>
<option>
<name>upload_crr_states</name>
<value></value>
</option>
<option>
<name>upload_csr_states</name>
<value></value>
</option>
-->
<!-- 2. the node acts as RA only -->
<option>
<name>enroll_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crr_states</name>
<value>ARCHIVED DELETED APPROVED SIGNED PENDING NEW</value>
</option>
<option>
<name>enroll_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value>PENDING NEW</value>
</option>
<option>
<name>receive_csr_states</name>
<value>PENDING RENEW NEW</value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crr_states</name>
<value>ARCHIVED DELETED APPROVED</value>
</option>
<option>
<name>download_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>download_mail_states</name>
<value>CRINS DEFAULT</value>
</option>
<option>
<name>upload_crr_states</name>
<value>APPROVED</value>
</option>
<option>
<name>upload_csr_states</name>
<value>APPROVED</value>
</option>
<!-- 3. the node acts as public/scep only -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_crl_states</name>
<value></value>
</option>
<option>
<name>enroll_crr_states</name>
<value></value>
</option>
<option>
<name>enroll_csr_states</name>
<value></value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value></value>
</option>
<option>
<name>receive_csr_states</name>
<value></value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crr_states</name>
<value>ARCHIVED DELETED APPROVED SIGNED PENDING RENEW NEW</value>
</option>
<option>
<name>download_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>download_mail_states</name>
<value>CRINS DEFAULT</value>
</option>
<option>
<name>upload_crr_states</name>
<value>NEW</value>
</option>
<option>
<name>upload_csr_states</name>
<value>RENEW NEW</value>
</option>
-->
<!-- 4. the node acts as LDAP only -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_crl_states</name>
<value></value>
</option>
<option>
<name>enroll_crr_states</name>
<value></value>
</option>
<option>
<name>enroll_csr_states</name>
<value></value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value></value>
</option>
<option>
<name>receive_csr_states</name>
<value></value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crr_states</name>
<value>ARCHIVED DELETED APPROVED SIGNED PENDING RENEW NEW</value>
</option>
<option>
<name>download_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>download_mail_states</name>
<value></value>
</option>
<option>
<name>upload_crr_states</name>
<value></value>
</option>
<option>
<name>upload_csr_states</name>
<value></value>
</option>
-->
<!-- 5. the node acts as public/scep and RA -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_certificate_states</name>
<value></value>
</option>
<option>
<name>enroll_crl_states</name>
<value></value>
</option>
<option>
<name>enroll_crr_states</name>
<value></value>
</option>
<option>
<name>enroll_csr_states</name>
<value></value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value></value>
</option>
<option>
<name>receive_csr_states</name>
<value></value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>download_crr_states</name>
<value>ARCHIVED DELETED APPROVED</value>
</option>
<option>
<name>download_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>download_mail_states</name>
<value>CRINS DEFAULT</value>
</option>
<option>
<name>upload_crr_states</name>
<value>APPROVED</value>
</option>
<option>
<name>upload_csr_states</name>
<value>APPROVED</value>
</option>
-->
<!-- 6. the node acts as RA and CA -->
<!--
<option>
<name>enroll_ca_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_certificate_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crl_states</name>
<value>VALID</value>
</option>
<option>
<name>enroll_crr_states</name>
<value>ARCHIVED DELETED APPROVED SIGNED PENDING NEW</value>
</option>
<option>
<name>enroll_csr_states</name>
<value>ARCHIVED DELETED</value>
</option>
<option>
<name>enroll_mail_states</name>
<value></value>
</option>
<option>
<name>receive_crr_states</name>
<value>PENDING NEW</value>
</option>
<option>
<name>receive_csr_states</name>
<value>PENDING RENEW NEW</value>
</option>
<option>
<name>download_ca_certificate_states</name>
<value></value>
</option>
<option>
<name>download_certificate_states</name>
<value></value>
</option>
<option>
<name>download_crl_states</name>
<value></value>
</option>
<option>
<name>download_crr_states</name>
<value></value>
</option>
<option>
<name>download_csr_states</name>
<value></value>
</option>
<option>
<name>download_mail_states</name>
<value></value>
</option>
<option>
<name>upload_crr_states</name>
<value></value>
</option>
<option>
<name>upload_csr_states</name>
<value></value>
</option>
-->
<!-- these are the devices for the default dataexchange -->
<option>
<name>dataexchange_device_up</name>
<value>/usr/local/openca/openca/var/tmp/ca-down</value>
</option>
<option>
<name>dataexchange_device_down</name>
<value>/usr/local/openra/openca/var/tmp/ra-down</value>
</option>
<option>
<name>dataexchange_device_local</name>
<value>/usr/local/openra/openca/var/tmp/ra-local</value>
</option>
</software_config>
</openca>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Openca-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openca-users
![https://xyz.org/mylogo.jpg"](https://xyz.org/mylogo.jpg"){kind=link}