>The SW1=0x6C is a standard ISO 7816-4 response code (see section 5.4.5).
It
>means that there is more data available - you don't *have* to issue the
next
>command to get the data if you don't want to. Anyway, any ISO compliant
>card may issue this response.
I didn't know that - I only have the specs for the GPK8000 card and the
Reflex60 reader, so I don't know what's ISO and what's proprietry. Thanks
for the info.
>I only wish that the CardTerminal drivers were consistent - some get the
>response automatically, some don't, so you always have to code your
>CardService to handle SW1=0x6C just in case.
Which is exactly what we had! The GemPlus OCF terminal driver the service
was written against handles the 0x6x codes by getting the data and mine
returned the 0x6x instead. I fixed that last night and now they're working
more similarly.
Regards,
David.
---
> Visit the OpenCard web site at http://www.opencard.org/ for more
> information on OpenCard---binaries, source code, documents.
> This list is being archived at http://www.opencard.org/archive/opencard/
