Hi all,
For quite some time I have used OCF successfully with a PCMCIA
reader (Reflex20) on a Windows95 laptop. However, last week I
had to completely reinstall Windows95 because of problems with
other programs, and now I have problems to make the reader work
again.
After the installation of windows I have
- installed Microsoft's scbase.exe (fresh from their web page),
- installed the Reflex20 drivers from Schlumberger's web page,
- tested the reader with its TestResMan Utility
(parameters: Exclusive, T0)
Result is: "Reader 0: State changed. A card is in the reader.
The card is allocated for exclusive use by another application.
The card in the reader is in use by one or more other applications,
but may be connected to in shared mode."
- installed OCF.
Trying my old programs, I found out that I recognize
the reader, but do not detect any card. I went back to more
simple programs with the same "success". E.g. when I use the
simple demo program GetTerminalInfos I get:
Address:
Name: Schlumberger Reflex 20 0
Type: PCSC10
terminal.features ():
-- listing properties --
address=
type=PCSC10
slots=1
name=Schlumberger Reflex 20 0
slot infos:
there is 1 slot present in this terminal!
slot channel available: yes
Slot info: opencard.core.terminal.Slot@1d3db8
slot ID: 0
card present: no
^^:-(
Does anyone have a solution to this problem? Did I forget
anything?
Thanks in advance,
Marko
---
> Visit the OpenCard web site at http://www.opencard.org/ for more
> information on OpenCard---binaries, source code, documents.
> This list is being archived at http://www.opencard.org/archive/opencard/
