https://bugs.freedesktop.org/show_bug.cgi?id=94528
--- Comment #7 from HuangRan <huang...@iscas.ac.cn> ---
> A correction for my comments above, I can see when VGA port is used, the
> Xserver can go into desktop and X log shows everything is working fine. For
> HDMI, it can do mode setting correctly only enter into command mode instead
> of graphics mode and X log shows it still probing VGA edid information which
> is not correct.
> If you have time to give a try on closed driver, let's see what happens at
> your side, especially for DP port and HDMI port.
> By the way, you should use a old kernel, i.e., 3.1.10 to compile the closed
> driver for VX900 which is a requirement for that driver.
>
> Thanks,
> Frank
Okay...
when I modify the xorg.conf file to enable HDMI, HDMI port is working too!
Thanks,
Frank
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
Openchrome-devel mailing list
Openchrome-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/openchrome-devel
