Hi Eric,
I just put OpenChrome DDX into release candidate testing.
However, I can possibly add special code specifically to handle OQO model 02.
Since I do not own this model, you will need to provide some hardware data for
me to do this.
I need lspci dump and via_regs_dump register dump.
$ lspci -vvnn > OQO_model_02_lspci.txt
$ ./autogen.sh --prefix=/usr --enable-debug --enable-xv-debug
--enable-viaregtool CFLAGS="-Wall"
$ make
$ cd tools
$ sudo ./via_regs_dump -d > OQO_model_02_via_regs_dump.txt
Also, Xorg.0.log located at /var/log will be helpful as well.
Regarding VGA and HDMI via the docking station, VGA might work, but HDMI
probably will not work.
This is because OpenChrome does not currently support HDMI device, and this
particular one probably uses an Analog Devices HDMI transmitter.
I am willing to write the code to support Analog Devices HDMI transmitter chip
if I owned the hardware.
Regarding scaling support, I may start studying how to handle it in the
near future, but it might take a while to support it.
Regards,
Kevin Brace
The OpenChrome Project maintainer / developer
> Date: Tue, 14 Feb 2017 12:47:00 -0600
> From: "Eric Swanson" <es...@erics.name>
> To: <openchrome-users@lists.freedesktop.org>
> Subject: [Openchrome-users] A thank you and status report on OQO model
> 02
> Message-ID: <003701d286f2$b9e8b910$2dba2b30$@erics.name>
> Content-Type: text/plain; charset="utf-8"
>
> I've been following openchrome development off and on for the past couple of
> years and wanted to
>
> say thank you for bringing the code up to date.
>
>
>
> I've been pulling from git about every six months, running on an OQO model
> 02 with a VX700 chipset
>
> and 800x480 screen. To get it to work properly on the OQO I have to modify
> src/via_lvds.c
>
> ViaPanelNativeModes ->
>
>
>
> 63c63,64
>
> < {1280, 800, FALSE, TRUE},
>
> ---
>
> > { 800, 480, FALSE, TRUE},
>
> > /* {1280, 800, FALSE, TRUE}, */
>
>
>
>
>
> as the OQO's bios reports it's internal flat panel as Index 7.
>
>
>
> I also need a modeline in xorg.conf.d/10-openchrome.conf to move the screen
> up-
>
> Modeline "800x480-2" 29.50 800 824 896 992 480 483 493 554 -hsync +vsync
>
>
>
> I haven't yet tried the VGA or HDMI outputs, and DVI requires a dongle I
> don't have,
>
> but the internal screen is working perfectly with hibernation and vt
> switching.
>
>
>
> The only thing I'm really missing is 'xrandr --output FP-1 --scale 2x2'
> which would be
>
> handy on an 800x480 device.
>
_______________________________________________
Openchrome-users mailing list
Openchrome-users@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/openchrome-users
Main page: http://www.openchrome.org
Wiki: http://www.openchrome.org/trac/wiki/TOC
