I have a Jeyway J7F2 mobo with CN700 chip-set, and cannot seem to get it
to work properly with my 24" Acer monitor at 1920x1200 resolution on VGA.
With the simple xorg.conf file as attached, I get the following results:
=> monitor reports 1920x1200 resolution on OSD
=> xwininfo reports 1920x1200 resolution as well
=> screen looks stretched out (=too big) in horizontal direction,
vertical resolution seems to be OK.
I tried using "Option "VBEModes" "true", but in that case the resolution
falls back to 1920x1080, and the content is moved to the right, with a
black vertical bar on the left side of the screen.
Can anyone confirm that a similar configurations works fine using
openchrome?
Any suggestions on how to get this to work? Should I start studying the
scary ModeLines section?
Z.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "xtrap"
Load "dbe"
Load "record"
Load "extmod"
Load "dri"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "PrintVGARegs" # [<bool>]
#Option "PrintTVRegs" # [<bool>]
#Option "I2CScan" # [<bool>]
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ExaNoComposite" # [<bool>]
#Option "ExaScratchSize" # <i>
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # <i>
#Option "ActiveDevice" # [<str>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # <i>
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "VbeSaveRestore" # [<bool>]
#Option "DisableXvBWCheck" # [<bool>]
#Option "MaxDRIMem" # <i>
#Option "AGPMem" # <i>
Identifier "Card0"
Driver "openchrome"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
# Option "VBEModes" "true"
Option "Accel" "true"
Option "EnableAGPDMA" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
_______________________________________________
openchrome-users mailing list
[email protected]
http://wiki.openchrome.org/mailman/listinfo/openchrome-users
Main page:
http://www.openchrome.org
Wiki:
http://wiki.openchrome.org
User Forum:
http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
