Frans-Willem Hardijzer wrote: > Hi, > > I've set up a nice little box with a VIA EPIA EX10000EG motherboard. > Everything is working fine up untill it loads the openchrome driver. > The TV (connected through DVI) reports "No signal" unless I set VBEModes > option, or set PanelSize & ForcePanel. Unfortunately, at this point it > also ignores any custom modelines, and it won't allow a native 1360x768 > resolution. The 1280x768 resolution will work, as it's in the VBE modes > table, but that will make the screen quite stretched :( > DVI output is not supported at the moment, so you need to use the VBEModes trick. It means the modesetting will fully depends on the VGA bios. If the mode you want is not available, then you're stuck. Unless you're willing to add support for DVI output by porting the code available at linux.via.com.tw to the openchrome driver (in your case, at least the code for the CX700 integrated TMDS, but support for VT1636 would be nice too).
Regards, Xavier _______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://wiki.openchrome.org User Forum: http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
