Further to my last email, I should have mentioned that I'm running * Ubuntu 8.04 * Kernel 2.6.24-21 ...
I've attached a log from dmesg if that helps at all... Cheers Shane On Thu, 2008-11-27 at 11:48 +1030, Shane Magrath wrote: > Hi, > I've been trying to get Via mini-itx EX15000G board working with a > Samsung 2243BWX DVI monitor. > > The monitor supports optimum 1680x1050 resolution at 60Hz and looks fine > when I use the "via" driver but I can't seem to get an OpenChrome config > for xorg.conf that looks as good as the via driver (config and logs > attached). Problems are that the fonts look really bad and the screen > seems to have a virtual resolution larger than the monitor resolution. > > Also, I can't seem to get any hardware acceleration working with either > the via or openchrome drivers which is a big problem because this box is > for a MythTV DVB-T installation. > > I've tried quite a few configurations but it's become beyond my ken in > terms of understanding the various driver capabilities, X acceleration > architectures,... > > I'm almost at the point of going over to the dark side (Windows XP)... > > Shane
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 62MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f51e0 [ 0.000000] Entering add_active_range(0, 0, 245488) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245488 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245488 [ 0.000000] On node 0 totalpages: 245488 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 125 pages used for memmap [ 0.000000] HighMem zone: 15987 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F92A0 checksum 0 [ 0.000000] ACPI: RSDP 000F92A0, 0014 (r0 CX700 ) [ 0.000000] ACPI: RSDT 3BEF3040, 0030 (r1 CX700 AWRDACPI 30302E32 AWRD 0) [ 0.000000] ACPI: FACP 3BEF30C0, 0084 (r2 CX700 AWRDACPI 30302E32 AWRD 0) [ 0.000000] ACPI: DSDT 3BEF31C0, 3D9A (r1 CX700 AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BEF0000, 0040 [ 0.000000] ACPI: MCFG 3BEF7080, 003C (r1 CX700 AWRDACPI 30302E32 AWRD 0) [ 0.000000] ACPI: APIC 3BEF6FC0, 005A (r1 CX700 AWRDACPI 30302E32 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243571 [ 0.000000] Kernel command line: root=UUID=43b286a7-23be-4e48-a9d1-3be8ed296c31 ro quiet splash xforcevesa [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1499.945 MHz processor. [ 13.093365] Console: colour VGA+ 80x25 [ 13.093371] console [tty0] enabled [ 13.094064] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 13.095197] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.153437] Memory: 961408k/981952k available (2177k kernel code, 19948k reserved, 1005k data, 368k init, 64448k highmem) [ 13.153457] virtual kernel memory layout: [ 13.153459] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 13.153463] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.153466] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 13.153469] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 13.153472] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 13.153475] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB) [ 13.153478] .text : 0xc0100000 - 0xc03205e4 (2177 kB) [ 13.153486] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.153557] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 13.233517] Calibrating delay using timer specific routine.. 3002.23 BogoMIPS (lpj=6004479) [ 13.233562] Security Framework initialized [ 13.233573] SELinux: Disabled at boot. [ 13.233609] AppArmor: AppArmor initialized [ 13.233617] Failure registering capabilities with primary security module. [ 13.233632] Mount-cache hash table entries: 512 [ 13.233805] Initializing cgroup subsys ns [ 13.233813] Initializing cgroup subsys cpuacct [ 13.233829] CPU: After generic identify, caps: 87c9baff 00000000 00000000 00000000 00000081 00000000 00000000 00000000 [ 13.233846] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.233851] CPU: L2 Cache: 128K (64 bytes/line) [ 13.233856] CPU: After all inits, caps: 07c9baff 00000000 00000000 00000000 00000081 00003fcc 00000000 00000000 [ 13.233873] Compat vDSO mapped to ffffe000. [ 13.233896] Checking 'hlt' instruction... OK. [ 13.249928] SMP alternatives: switching to UP code [ 13.251613] Freeing SMP alternatives: 11k freed [ 13.251827] Early unpacking initramfs... done [ 14.027150] ACPI: Core revision 20070126 [ 14.027264] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.032176] CPU0: Centaur VIA Esther processor 1500MHz stepping 09 [ 14.032210] Total of 1 processors activated (3002.23 BogoMIPS). [ 14.032397] ENABLING IO-APIC IRQs [ 14.032587] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 14.176766] Brought up 1 CPUs [ 14.176807] CPU0 attaching sched-domain: [ 14.176813] domain 0: span 01 [ 14.176817] groups: 01 [ 14.177107] net_namespace: 64 bytes [ 14.177121] Booting paravirtualized kernel on bare hardware [ 14.177963] Time: 0:49:25 Date: 11/27/08 [ 14.178009] NET: Registered protocol family 16 [ 14.178307] EISA bus registered [ 14.178345] ACPI: bus type pci registered [ 14.185058] PCI: PCI BIOS revision 3.00 entry at 0xfae70, last bus=3 [ 14.185064] PCI: Using configuration type 1 [ 14.185083] Setting up standard PCI resources [ 14.193432] ACPI: EC: Look up EC in DSDT [ 14.201317] ACPI: Interpreter enabled [ 14.201324] ACPI: (supports S0 S1 S3 S4 S5) [ 14.201351] ACPI: Using IOAPIC for interrupt routing [ 14.208326] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.209506] PCI: Transparent bridge - 0000:00:13.1 [ 14.209540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.209945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT] [ 14.210145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] [ 14.242839] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 14.243129] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 [ 14.243420] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [ 14.243709] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12) [ 14.243959] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 14.244201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 14.244442] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 14.244704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 14.244920] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.244971] pnp: PnP ACPI init [ 14.244991] ACPI: bus type pnp registered [ 14.248375] pnp: PnP ACPI: found 10 devices [ 14.248382] ACPI: ACPI bus type pnp unregistered [ 14.248389] PnPBIOS: Disabled by ACPI PNP [ 14.248752] PCI: Using ACPI for IRQ routing [ 14.248758] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.276621] NET: Registered protocol family 8 [ 14.276626] NET: Registered protocol family 20 [ 14.276730] AppArmor: AppArmor Filesystem Enabled [ 14.280606] Time: tsc clocksource has been installed. [ 14.288662] system 00:01: ioport range 0x400-0x47f has been reserved [ 14.288669] system 00:01: ioport range 0x500-0x50f has been reserved [ 14.288685] system 00:02: iomem range 0xf0000000-0xf0000fff has been reserved [ 14.288698] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 14.288704] system 00:03: ioport range 0x800-0x87f has been reserved [ 14.288711] system 00:03: ioport range 0x880-0x8ff has been reserved [ 14.288729] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.288742] system 00:09: iomem range 0xd0000-0xd3fff has been reserved [ 14.288749] system 00:09: iomem range 0xda000-0xdbfff has been reserved [ 14.288756] system 00:09: iomem range 0xf0000-0xfbfff could not be reserved [ 14.288763] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 14.288770] system 00:09: iomem range 0x3bef0000-0x3befffff could not be reserved [ 14.288778] system 00:09: iomem range 0xffff0000-0xffffffff could not be reserved [ 14.288785] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 14.288792] system 00:09: iomem range 0x100000-0x3beeffff could not be reserved [ 14.288799] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 14.288807] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 14.288814] system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved [ 14.319437] PCI: Bridge: 0000:00:01.0 [ 14.319442] IO window: e000-efff [ 14.319449] MEM window: dd000000-deffffff [ 14.319455] PREFETCH window: a0000000-bfffffff [ 14.319462] PCI: Bridge: 0000:00:13.0 [ 14.319466] IO window: d000-dfff [ 14.319472] MEM window: dfe00000-dfefffff [ 14.319478] PREFETCH window: dfd00000-dfdfffff [ 14.319486] PCI: Bridge: 0000:00:13.1 [ 14.319490] IO window: c000-cfff [ 14.319496] MEM window: dfc00000-dfcfffff [ 14.319502] PREFETCH window: dfb00000-dfbfffff [ 14.319520] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 14.319529] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 14.319538] PCI: Setting latency timer of device 0000:00:13.1 to 64 [ 14.319563] NET: Registered protocol family 2 [ 14.356680] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.357245] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.358991] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.359833] TCP: Hash tables configured (established 131072 bind 65536) [ 14.359840] TCP reno registered [ 14.368778] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 15.097560] it is [ 15.883892] Freeing initrd memory: 7328k freed [ 15.884663] audit: initializing netlink socket (disabled) [ 15.884683] audit(1227746966.628:1): initialized [ 15.884966] highmem bounce pool size: 64 pages [ 15.888024] VFS: Disk quotas dquot_6.5.1 [ 15.888159] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.888388] io scheduler noop registered [ 15.888393] io scheduler anticipatory registered [ 15.888398] io scheduler deadline registered [ 15.888419] io scheduler cfq registered (default) [ 15.888443] PCI: VIA PCI bridge detected. Disabling DAC. [ 15.888509] Boot video device is 0000:01:00.0 [ 15.888927] isapnp: Scanning for PnP cards... [ 16.242475] isapnp: No Plug & Play device found [ 16.290982] Real Time Clock Driver v1.12ac [ 16.291120] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.292854] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.292980] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 16.293193] PNP: No PS/2 controller found. Probing ports directly. [ 16.293585] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.293593] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.302609] mice: PS/2 mouse device common for all mice [ 16.302799] EISA: Probing bus 0 at eisa.0 [ 16.302846] EISA: Detected 0 cards. [ 16.302852] cpuidle: using governor ladder [ 16.302856] cpuidle: using governor menu [ 16.303052] NET: Registered protocol family 1 [ 16.303101] Using IPI No-Shortcut mode [ 16.303147] registered taskstats version 1 [ 16.303332] Magic number: 0:843:810 [ 16.303504] hash matches device ptys4 [ 16.303586] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 16.303591] EDD information not available. [ 16.304083] Freeing unused kernel memory: 368k freed [ 16.304145] Write protecting the kernel read-only data: 801k [ 17.885971] fuse init (API version 7.9) [ 19.011897] SCSI subsystem initialized [ 19.187352] libata version 3.00 loaded. [ 19.223398] pata_via 0000:00:0f.0: version 0.3.3 [ 19.241754] scsi0 : pata_via [ 19.271310] scsi1 : pata_via [ 19.273933] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 19.273941] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 19.435382] ata1.00: ATA-7: ST3250410AS, 4.AAA, max UDMA/133 [ 19.435391] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 19.451346] ata1.00: configured for UDMA/133 [ 19.591012] usbcore: registered new interface driver usbfs [ 19.591050] usbcore: registered new interface driver hub [ 19.618921] usbcore: registered new device driver usb [ 19.646917] USB Universal Host Controller Interface driver v3.0 [ 19.787593] ata2.00: ATAPI: PIONEER DVD-RW DVR-K06, 1.01, max UDMA/33 [ 19.973444] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 19.973456] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 19.976888] ata2.00: configured for UDMA/33 [ 19.977056] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 4.AA PQ: 0 ANSI: 5 [ 19.985780] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K06 1.01 PQ: 0 ANSI: 5 [ 19.986004] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 19.986023] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 19.986547] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 19.986581] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000f800 [ 19.986811] usb usb1: configuration #1 chosen from 1 choice [ 19.986850] hub 1-0:1.0: USB hub found [ 19.986860] hub 1-0:1.0: 2 ports detected [ 20.090548] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 17 [ 20.090568] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 20.090606] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 20.090638] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000f400 [ 20.090825] usb usb2: configuration #1 chosen from 1 choice [ 20.090864] hub 2-0:1.0: USB hub found [ 20.090873] hub 2-0:1.0: 2 ports detected [ 20.194448] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 18 [ 20.194467] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 20.194509] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 20.194542] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000f000 [ 20.194731] usb usb3: configuration #1 chosen from 1 choice [ 20.194772] hub 3-0:1.0: USB hub found [ 20.194781] hub 3-0:1.0: 2 ports detected [ 20.298548] ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 19 [ 20.298570] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 20.298627] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4 [ 20.298673] ehci_hcd 0000:00:10.4: debug port 1 [ 20.298693] ehci_hcd 0000:00:10.4: irq 19, io mem 0xdffff000 [ 20.310205] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.310413] usb usb4: configuration #1 chosen from 1 choice [ 20.310461] hub 4-0:1.0: USB hub found [ 20.310472] hub 4-0:1.0: 6 ports detected [ 20.414440] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 20.420526] eth0: VIA Rhine III at 0xdfcff000, 00:40:63:f6:b8:87, IRQ 20. [ 20.421241] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 20.421848] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 19 (level, low) -> IRQ 21 [ 20.474706] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[dfcfe000-dfcfe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.133312] usb 4-3: new high speed USB device using ehci_hcd and address 2 [ 21.270733] usb 4-3: configuration #1 chosen from 1 choice [ 21.365148] Driver 'sd' needs updating - please use bus_type methods [ 21.365275] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 21.365295] sd 0:0:0:0: [sda] Write Protect is off [ 21.365300] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.365327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.365399] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 21.365415] sd 0:0:0:0: [sda] Write Protect is off [ 21.365420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.365444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.365451] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 21.386701] sda1 sda2 < sda5 > [ 21.412300] sd 0:0:0:0: [sda] Attached SCSI disk [ 21.424625] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.424661] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 21.459729] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 21.459740] Uniform CD-ROM driver Revision: 3.20 [ 21.459833] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 21.760762] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00406350000b49b4] [ 21.824535] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 22.002068] usb 2-2: configuration #1 chosen from 1 choice [ 22.005185] usbcore: registered new interface driver hiddev [ 22.008527] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:10.4/usb4/4-3/4-3:1.1/input/input1 [ 22.020440] input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:10.4-3 [ 22.034355] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2 [ 22.044364] input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-2 [ 22.074597] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.1/input/input3 [ 22.096283] input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2 [ 22.096315] usbcore: registered new interface driver usbhid [ 22.096323] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 22.301547] Attempting manual resume [ 22.301554] swsusp: Resume From Partition 8:5 [ 22.301558] PM: Checking swsusp image. [ 22.301774] PM: Resume from disk failed. [ 22.373773] kjournald starting. Commit interval 5 seconds [ 22.373792] EXT3-fs: mounted filesystem with ordered data mode. [ 30.659307] Linux agpgart interface v0.102 [ 30.755098] agpgart: Detected VIA CX700 chipset [ 30.788067] agpgart: AGP aperture is 128M @ 0xd0000000 [ 31.038721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.099886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.850987] input: Power Button (FF) as /devices/virtual/input/input4 [ 31.866909] ACPI: Power Button (FF) [PWRF] [ 31.867133] input: Power Button (CM) as /devices/virtual/input/input5 [ 31.881737] ACPI: Power Button (CM) [PWRB] [ 31.881921] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 31.893769] ACPI: Sleep Button (CM) [SLPB] [ 32.960875] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 36.998576] dvb-usb: found a 'DigitalNow TinyTwin DVB-T Receiver' in warm state. [ 36.998717] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 37.000990] DVB: registering new adapter (DigitalNow TinyTwin DVB-T Receiver) [ 37.551388] af9013: firmware version:4.95.0 [ 37.557471] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 37.708449] MXL5005S: Attached at address 0xc6 [ 37.708462] dvb-usb: DigitalNow TinyTwin DVB-T Receiver successfully initialized and connected. [ 37.719304] usbcore: registered new interface driver dvb_usb_af9015 [ 37.985594] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 22 [ 37.985635] PCI: Setting latency timer of device 0000:02:01.0 to 64 [ 41.624619] lp: driver loaded but no devices found [ 42.084752] Adding 2835432k swap on /dev/sda5. Priority:-1 extents:1 across:2835432k [ 42.694076] EXT3 FS on sda1, internal journal [ 44.644846] ip_tables: (C) 2000-2006 Netfilter Core Team [ 45.336262] No dock devices found. [ 49.346675] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 49.346686] apm: overridden by ACPI. [ 49.747603] ppdev: user-space parallel port driver [ 49.934879] audit(1227747001.599:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4956 profile="/usr/sbin/cupsd" namespace="default" [ 50.304515] NET: Registered protocol family 10 [ 50.305255] lo: Disabled Privacy Extensions [ 94.656132] Marking TSC unstable due to: cpufreq changes. [ 94.663408] Time: acpi_pm clocksource has been installed. [ 50.667466] Clocksource tsc unstable (delta = -113560631 ns) [ 96.616098] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 53.009765] Bluetooth: Core ver 2.11 [ 53.024286] NET: Registered protocol family 31 [ 53.024295] Bluetooth: HCI device and connection manager initialized [ 53.024303] Bluetooth: HCI socket layer initialized [ 53.192628] Bluetooth: L2CAP ver 2.9 [ 53.192637] Bluetooth: L2CAP socket layer initialized [ 53.219906] Bluetooth: RFCOMM socket layer initialized [ 53.220241] Bluetooth: RFCOMM TTY layer initialized [ 53.220248] Bluetooth: RFCOMM ver 1.8 [ 54.193286] NET: Registered protocol family 17 [ 55.577632] [drm] Initialized drm 1.1.0 20060810 [ 55.595101] via: disagrees about version of symbol struct_module [ 61.310754] hda-intel: Invalid position buffer, using LPIB read method instead. [ 121.519153] eth0: no IPv6 routers present [ 459.840897] via: disagrees about version of symbol struct_module
_______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://wiki.openchrome.org User Forum: http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
