I had tried this(command /e:2048) on a Win95 PC and it seemed to work fine there (I ended up with two shells loaded into memory) but the system did not crash. Win98 did crash.
I will try your method.. thanks -Sunil -----Original Message----- From: Suhaib Siddiqi [mailto:[EMAIL PROTECTED] Sent: Friday, November 05, 1999 8:27 AM To: [email protected] Subject: RE: [opendx-users] OpenDX on Win98 Your command is not exactly correct. You need the following in config.sys, not autoexec.bat, otherwise you are bound to rash your system and creat problems possibly corrupt it. shell=C:\command.com /e:4096 /p Then rebot Suhaib **************************** Suhaib M. Siddiqi Senior Research Scientist Inspire Pharmaceuticals, Inc. 4222 Emperor Blvd., Suite 470 Durham, NC 27703 Tel: 919-941-9777 Ext 238 FAX: 919-941-9797 http://www.inspirepharm.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Atri, Sunil R > Sent: Friday, November 05, 1999 11:14 AM > To: '[email protected]' > Subject: RE: [opendx-users] OpenDX on Win98 > > > Hi Jean-Luc/Suhaib, > > I think the problem might be that I am running out of > ENV space, some of the ENV varaibles that you listed in > your earlier mail were not there.I tried increasing > it by the following command, in autoexec.bat. > > command /E:2048 > > i.e. increase the ENV space to 2048 bytes. > but the system crashed. This command seemed to work fine in other > PC's. > > I will be reloading win98 today, and try it again but > this time at > the command prompt before I run OpenDX.bat. > > more later. > -Sunil > > -----Original Message----- > From: Jean-Luc Vay [mailto:[EMAIL PROTECTED] > Sent: Thursday, November 04, 1999 7:24 AM > To: [email protected] > Subject: Re: [opendx-users] OpenDX on Win98 > > > Ok, when it finally works, tell me what appends when you display > something without being connected to the outside world because > I have a problem with this. > > Jean-Luc > > "Atri, Sunil R" wrote: > > > I will go and check again. The PC is at home so I will > be able to > > tell you all tommorow. most probably it is my ENV, > maybe they are not > > getting set. > > > > -Sunil > > > > -----Original Message----- > > From: Suhaib Siddiqi [mailto:[EMAIL PROTECTED] > > Sent: Thursday, November 04, 1999 2:38 PM > > To: [email protected] > > Subject: RE: [opendx-users] OpenDX on Win98 > > > > I am still unable to understand what exactly problems Sunil is > > having. > > > > **************************** > > Suhaib M. Siddiqi > > Senior Research Scientist > > Inspire Pharmaceuticals, Inc. > > 4222 Emperor Blvd., Suite 470 > > Durham, NC 27703 > > > > Tel: 919-941-9777 Ext 238 > > FAX: 919-941-9797 > > http://www.inspirepharm.com > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of > > > Jean-Luc Vay > > > Sent: Thursday, November 04, 1999 9:33 AM > > > To: [email protected] > > > Subject: Re: [opendx-users] OpenDX on Win98 > > > > > > > > > I have Opendx installed on windows 98 and it works. > > > So, try to describe your error messages in details > > > so that we can find out what is wrong. > > > > > > Jean-Luc > > > > > > "Atri, Sunil R" wrote: > > > > > > > Yes that too! when unmounting I got the message > > > > "/ not found" which the README said was OK. > > > > > > > > -----Original Message----- > > > > From: Suhaib M. Siddiqi > > > [mailto:[EMAIL PROTECTED] > > > > Sent: Thursday, November 04, 1999 1:58 PM > > > > To: '[email protected]'; > [email protected] > > > > Subject: RE: [opendx-users] OpenDX on Win98 > > > > > > > > Ok > > > > Did you do a umount and mount -b as suggested in > README file? > > > > Othewise your file will have \r\n\ inserted by Microsoft > > > > and that would cause the Xtwarnings to dump. > > > > > > > > Suhaib > > > > > > -- > > > ------------------------------------------------- > > > Jean-Luc Vay > > > Accelerator and Fusion Research Division > > > Lawrence Berkeley National Laboratory - MS 71J > > > Berkeley, CA 94720, USA > > > Tel: (1) 510-486-4934 > > > Fax: (1) 510-495-2323 > > > Email: [EMAIL PROTECTED] > > > ------------------------------------------------- > > > > > > > > -- > ------------------------------------------------- > Jean-Luc Vay > Accelerator and Fusion Research Division > Lawrence Berkeley National Laboratory - MS 71J > Berkeley, CA 94720, USA > Tel: (1) 510-486-4934 > Fax: (1) 510-495-2323 > Email: [EMAIL PROTECTED] > ------------------------------------------------- >
