Oops, let one get away. As I was saying, the dx.mdf included in the MS binary is OK, but the module is not in dxexec.exe, implying that its not in user.c - which is created by awkking dx.mdf! So it seems like the dx.mdf that is used to create user.c, in the object directory corresponding to src/exec/dxmods, is different from the one that is in the lib directory of the release. dx.mdf is created by passing dxmdf.src through the preprocessor with -DEXECUTIVE_MODS and -DCPLUSPLUS_UI.
The (intended) sequence is: dx.mdf is created in the dxmods directory from dxmdf.src by cpp with -DEXECUTIVE_MODS and -DCPLUSPLUS_UI. user.c is created in the dxmods directory from dx.mdf by awk. dx.mdf is copied from the dxmods directory to the lib directory in the install tree. So. I'd guess that the dx.mdf in the dxmods directory in the MS object tree does not include the executive mods - otherwise, they'd appear in user,c and would therefore be in dxexec.exe. Check by grepping dx.mdf in the object directory it for Switch. If it isn't there, then it needs to be recreated from dxmdf.src - as in the rule in localmk.in. If it is, then does Switch show up in user.c? OK. If Switch is found grepping user.c, I have no idea what could be wrong. Otherwise, if Switch is found grepping dx.mdf, you need to build user.c from dx.mdf - see the rule in dxmods/local.mk. Otherwise, Switch is certainly in dxmdf.src - build dx.mdf from dxmdf.src (see the rule in dxmods/local.mk) and then build user.c from it. Good luck Greg Suhaib Siddiqi <[EMAIL PROTECTED]>@opendx.watson.ibm.com on 07/09/2001 03:33:52 PM Please respond to [email protected] Sent by: [EMAIL PROTECTED] To: "'[email protected]'" <[email protected]> cc: Subject: RE: [opendx-users] Problem in Opendx for windows/nt - Suhaib? Greg, The way I compile MSVC versions: 1) Compile using Cygwin, which creates all the files. 2) Use the MSVC Project files to compile MSVC version. If EXECUTIVE_MODS were not #define then this problem should show up in Cygwin version too, but it does not? Can you suggest how to manually correct it? Suhaib -----Original Message----- From: Gregory D Abram [mailto:[EMAIL PROTECTED] Sent: Monday, July 09, 2001 3:13 PM To: [email protected] Subject: [opendx-users] Problem in Opendx for windows/nt - Suhaib? There is indeed a problem with the current binary for Windows - the one built under MSVC, not the one built under cygwin. It looks like none of the EXECUTIVE_MODS are there - I think that the rule to create dx.mdf from dxmdf.src in src/exec/dxmods must have been wrong. When dxmdf.src is passed through the preprocessor to create dx.mdf, the EXECUTIVE_MODS #define wasn't set. Greg "Allard" <[EMAIL PROTECTED]>@opendx.watson.ibm.com on 07/07/2001 11:48:24 AM Please respond to [email protected] Sent by: [EMAIL PROTECTED] To: <[email protected]> cc: Subject: Re: Re: [opendx-users] Opendx for windows/nt I have seen this too when I tried to run the windbarbs.net example program. Also, I have experienced the problem with the sequencer which others have been experiencing when I try to configure the range of the frames that I wish to view. When I keep the defaults (1-100), it works fine. I have also been getting errors relating to the keyboard. For example, if I try to highlight a directory name in the file browser and then hit "backspace" to erase the name so I can put my directory in, the cursor advances as if I hit the space bar. I get the same result when I hit "delete". Also, "delete" won't work in the program editor window to cut a module. I have to go to the menu and use the mouse. -----Original Message----- From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> To: [email protected] <[email protected]> Date: Saturday, July 07, 2001 7:22 AM Subject: Ad: Re: [opendx-users] Opendx for windows/nt > > "Gregory D Abram" > <[EMAIL PROTECTED]> Til: [email protected] > Sendt av: cc: > [EMAIL PROTECTED] Emne: Re: [opendx-users] Opendx for windows/nt > on.ibm.com > > > 07/06/01 17:36 > Vennligst send svar til > opendx-users > > > > > > > > > > >> I see 4.1.3 is available in binary form from OpenDX.org - is there a >> problem with it? > >> Greg > > >actullay, yes (see below), and it seems to be that I'm not teh only one. > >Hey: > >I' m trying to install Opendx Ver 4.13 on Windows NT with Exceed 6.1. I >installed it using the wizard and updated the *.bat files, as mentioned. >dx seems to work, but I've problemen with some of the modules, e.g. , >trying to l open accumulate.net >I'm geeting the following error list. Parts of the visualtion actullay do >work. > >Memory cache will use 224 MB (14 for small items, 210 for large) > >port = 1900 > >Begin Execution > 0: worker here [263] > > 0: ERROR: Executive: function does not exist >Begin Execution > 0: WARNING: Function return values are ignored: Executive > > 0: ERROR: Executive: function does not exist > 0: WARNING: Function return values are ignored: Executive > > 0: ERROR: Executive: function does not exist > 0: WARNING: Function return values are ignored: Executive > > 0: ERROR: GetLocal: function does not exist > 0: ERROR: ForEachMember: function does not exist > 0: ERROR: GetLocal: function does not exist > 0: ERROR: SetLocal: function does not exist > 0: WARNING: Function return values are ignored: SetLocal > > 0: ERROR: SetLocal: function does not exist > 0: WARNING: Function return values are ignored: SetLocal > >ERROR: GetLocal: Operation not implemented: function does not exist > 0: opening file 'D:/PROGRA~1/Opendx/SAMPLES/DATA/cloudwater.dx' >ERROR: ForEachMember: Operation not implemented: function does not exist > 0: WARNING: /main:0/Collect:2 contains only NULL and/or invalid inputs > > >has somebody an idea > >Peter Gauer > > > >
