On 06/21/2011 07:04 AM, Tom Parkin wrote:
Hi list,
I'm trying to set up a working openembedded-core/uClibc mipsel
environment. I found that setting TCLIBC = "uclibc" in local.conf
yielded the following:
ERROR: Nothing PROVIDES 'glib-2.0-native'
I traced this down to code in meta/recipes-core/glib-2.0/glib-2.0.inc,
which raises a SkipPackage exception if USE_NLS = "no".
The reason that USE_NLS = "no" in this case is that
meta/conf/distro/include/tclibc-uclibc.inc sets USE_NLS ?= "no".
Looking further at tclibc-uclibc.inc, though, it appears that there is
some code attempting to work around this issue:
USE_NLS_glib-2.0 = "yes"
Sadly, this appears to get ignored. Following this up on the #yocto
IRC channel, it seems that a more appropriate formulation of the above
would be:
USE_NLS_pn-glib-2.0-native = "yes"
The attached patch allows me to (at least) assemble the bitbake task
list when TCLIBC = "uclibc". I'm not sure whether this is the correct
approach, though.
Any comments?
Yes this seems to be ok. If you look into angstrom distribution then it
already has it in its distro config files
http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-angstrom/tree/conf/distro/include/angstrom-uclibc.inc
but probably putting it in core would be appropriate.
Many thanks,
Tom
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
