On Fri, 2019-09-06 at 14:51 -0400, Trevor Gamblin wrote: > From: Trevor Gamblin <[email protected]> > > The libevent ptest used to report only a global pass or a fail > result. > Count individual PASS, FAIL, SKIP results. The SKIP results now > include tests that are disabled in the libevent code. > > libevent's ptest output did not comply with the automake-style output > "result: testname", and reported a FAIL status at the end of the test > run if any of the libevent tests failed. This patch makes the log > consistent with the automake style: > > PASS: http/cancel_by_host_no_ns > PASS: http/cancel_inactive_server > PASS: http/cancel_by_host_no_ns_inactive_server > SKIPPED: http/cancel_by_host_server_timeout > SKIPPED: http/cancel_server_timeout > > and provides a summary as follows: > > === Test Summary === > TOTAL: 316 > PASSED: 300 > FAILED: 0 > SKIPPED: 16 > DURATION: 87 > END: /usr/lib/libevent/ptest > > Signed-off-by: Trevor Gamblin <[email protected]>
Thanks for this, it is a definite improvement on what was there before. Results from the autobuilder run: https://autobuilder.yocto.io/pub/non-release/20190907-4/testresults/testresult-report.txt Cheers, Richard -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
